Xerox Phaser 3200MFP, Руководство пользователя

Страница: 67 / 236

4 Paper Handling
Xerox Phaser 3200MFP 4-5
Loading Paper
Proper paper loading helps prevent paper jams and ensure trouble-free
printing. Do not remove the paper in the tray while a job is printing. Doing so
may cause a paper jam. See
Paper Type, Input Sources, and Capacities on
page 4-2 for acceptable paper size and capacity for the tray.
Using the Paper Tray
The paper tray holds 250 sheets of paper.
For details about loading paper in the tray, see
Loading Paper on page 2-6 .
To use the special material like envelope, label or card, remove the stack of
plain paper and load one sheet of special material into the tray.
Using the Manual Tray
When you print a document using your PC and want to check the print quality
after each page is printed, load the paper in the manual tray and select
Manual Feeder for Source from the print driver.
1.
Load the print material into the
tray. If there is a print side to the
paper it should be face up.
Push the print material firmly into
the manual tray.
2.
Adjust the paper guide against
the print material without bending
the material.
3.
Select Manual Feeder for
Source from the software
application, and then select the
correct paper size and type. For
details, see
Printing a Document
on page 6-6 .
4.
Send the job to the printer.
5.
On the machine the display shows “Add Paper & Press Start”. Press
Start on the machine to start feeding. Printing is started.
6.
If you have multiple pages to be printed, the display shows “Add Paper &
Press Start” again. Load the next sheet and press
Start .
Repeat this step for every page to be printed.