manualshive.com logo in svg

WinGD X82-B, Руководство по обслуживанию

Поделиться
Скачать
WinGD X82-B Скачать руководство пользователя страница 26

1.3

Technical documentation set

Because of the continuous development of the engine, the technical documentation for the
engine changes and is regularly updated. The change record shows all changes.

Important data and changes are given directly to the customer in the service bulletins.

To order technical documents, the data that follows is necessary:

•

Engine type, year of manufacture and engine manufacturer

•

Name of ship or site of installation

•

Cylinder or engine number

•

Special equipment

•

Document type (printed manuals, CD or Shipdex dataset).

The technical documentation set for this engine includes the publications that follow.

1.3.1

 Operation Manual

The Operation Manual (OM) contains data about engine operation, the necessary operating
media (oil, water, fuel etc) and descriptions of the components and systems. The manual also
gives troubleshooting procedures.

The manual gives data about the standard engine with all cylinder numbers, alternative designs
and special equipment.

In this manual the engine connections (refer to the pipe connection plan) are the interface of the
description. For a description of the plant supply systems refer to the Marine Installation
Manual.

1.3.2

 Maintenance Manual

The Maintenance Manual (MM) contains data about disassembly / assembly procedures that
are necessary for the engine maintenance. The manual includes the maintenance schedule,
data about the masses (weights) of components, a clearance table, tightening values for
important screw connections and a tool list.

1.3.3

 Spare Parts Catalogue

In the Spare Parts Catalogue (SPC, or code book) all spare parts of the engine are marked with
a unique code number. You can order spare parts only with the code number from the Spare
Parts Catalogue. Order spare parts from one of the suppliers that follow:

•

CSSC Marine Service Co., Ltd.

•

Wärtsilä Services Switzerland Ltd.

•

Engine supplier.

X82-B

AA00-0000-00AAA-018B-A

Maintenance Manual

Technical documentation set

Winterthur Gas & Diesel Ltd.

- 26 -

Issue 001 2020-10

Содержание X82-B










































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды