Westfield AeroRace 2008, Руководство по сборке

Страница: 53 / 99

Revision 34
Chapter 8
Prop Shaft & Steering Column
Contents
INTRODUCTION .............................................................. 1
Tools Required ................................................................ 1
Standard Parts ................................................................ 1
Parts Required ................................................................ 2
FITTING OF PROPSHAFT & STEERING COLUMN ................. 3
1 Fitting - Propshaft ............................................... 3
2 Fitting – Steering Column ..................................... 3
3 Fitting – Steering Wheel ....................................... 4
INTRODUCTION
The propshaft must be fitted prior to fitment of the engine and gearbox. The propshaft has a sliding joint and four-bolt flange. The end with a
four-bolt flange connection is fitted to the differential. The sliding coupling will be fitted onto the gearbox output shaft during the engine and
gearbox installation.
The steering column consists of two separate bearings mounted to the chassis, which support the column.
Tools Required
A. 13mm Spanner x2
B. 8mm Spanner
C. 13mm Socket x2
D. Ratchet
E. Torque Wrench
F. 6mm Drill Bit
G. 3mm Allen Key
H. Wheel Chocks
I. Masking Tape
J. Pair of Compases
Standard Parts
A. M8 x 35mm Set Screw x2
B. M8 x 25mm Set Screw x2
C. M5 x 16mm Cap Head x3
D. M8 Nylocs x4
E. M6 Nylocs x3
F. M8 STD Washer x8