
Differential and Rear Brakes 5•4
1
Place the drive shaft [D/E] on the hub of
the differential (Fig 2.1).
2.1
2
The driveshaft’s are fixed using twelve
M8x50mm cap screws, which require
thread lock.
NOTE:
Tighten the cap screws progressively by
hand then torque up to34Nm (25ft/lbs)
3
Insert the cap screws into the wheel hub
(upright) fixing the driveshaft into
position put locktight onto the cap
screws.
2.2
4
Torque up the cap screws to 34Nm
(25ft/lbs), to do this the hub will need to
be held to stop it rotating, use a suitable
lever to do so (Fig 2.2).
3
Fitting – Disk & Calliper.
NOTE:
The discs have a protective coating on them
that must be removed before fitment. Use
white spirit or a proprietary brake cleaner if
preferred. Ensure the disc is completely
clean and dry before fitting the calipers.
1
Position the brake disc over the wheel
studs and against the hub (Fig 3.1).
3.1
2
Offer the caliper [B] up to the hub
ensuring that the bleed nipple is at the
top (Fig 3.2).
3.2
3
Locate two M10x45 cap headed set
screws from your parts, place a M10
spring washer on each.
4
Insert the two set screws with thread
lock on each. Torque to 47Nm (35 ft/lbs)
(Fig 3.3).
3.3
4
Fitting – Rollcage Supports
1
Locate the support bars [G] from your
parts. They are handed so ensure when
fitting that you have the correct side.
2
They are fitted to the chassis in the
cockpit to either side of the seats
(Fig4.1).
4.1
3
Fix the bars to the chassis with M10 x 40
cap screws secured with nyloc nuts on
the outside. The nuts will not be seen
once the body is on (Fig 4.2).
4.2
4
Torque the bolts to 38Nm 28ft/lbs and
repeat the process for the other side.
Содержание AeroRace 2008
