Weidmuller UR20 Series, Руководство пользователя

Страница: 23 / 58

6 Commissioning | Requirements
23 Manual Communication module UR20-4COM-IO-LINK 2547720000/03/09.2019
WARNUNG
Explosion risk!
▶ Before starting any work, make sure that
there is not a potentially explosive atmos-
phere!
WARNUNG!
Manipulation of the control unit!
During commissioning, the system may be
manipulated to such an extent that risk to life
and material damage can result.
▶ Make sure that system components can-
not start up unintentionally!
ATTENTION
The product can be destroyed!
▶ Perform an insulation test every time before putting the
station into operation (see section 7.6 in the u-remote
IP20 manual).
▶ Always observe the complete documentation
in the u-remote IP20 manual (document
no. 1432780000) and in the u-remote web
server manual (document no.
2112220000).
6.1 Requirements
Before you start the commissioning work, the following re-
quirements must be fulfilled.
– The control unit must be in operation.
– The u-remote station must be completely assembled and
wired.
– The fieldbus coupler and UR20-4COM-IO-LINK module
must use the current firmware versions.
– The control unit and u-remote station must be connected
to each other, and a PC/laptop must also be connected.
– The power supply must be turned on.
6.2 Device description files
▶ Download the current device description files from the
Weidmüller website.
These include:
– GSDML files for PROFINET couplers
– GSD files for PROFIBUS couplers
– ESI files for EtherCAT couplers
– EDS files for Ethernet/IP couplers
– EDS files for DeviceNet couplers
– EDS files for CANopen couplers
– XDD files for POWERLINK couplers
If bitmap files for visualising the couplers are also
supplied, store them in the same folder as the
device description files.
You require the current device description
files in order to use all the functions of the
UR20-4COM-IO-LINK communication module.
The naming convention for GSDML files always follows this
pattern: GSDML_V2.3-WI-UR20-yyyymmdd.xml. The date
in the file name (dd.mm.yyyy) indicates the version of the
GSDML file and helps to determine whether you are already
using the latest version.
The version number of a GSD file can be found from the file.
If you open the file with a GSD editor, you can find the ver -
sion number in the “Info_Text” entry. If you open the file with
a text editor, you can find the version number in the entry
comment.
The version number of an ESI file can be found from the file.
If you open the file with a text editor, you can find the version
number in the “FileVersion” attribute of the “Vendor” tag.
The version number of an EDS file can be found from the file.
Open the file using a text editor.
– Ethernet/IP: “Revision” entry in the “File” section
– DeviceNet: “Revision” entry in the “File” section
– CANopen: “FileVersion” entry in the “FileInfo” section
The version number of an XDD file can be found from the
file. If you open the file with a text editor, you can find the
version number in the “FileVersion” attribute of the “Profile -
Body” tag.
6 Commissioning