Weidmuller UR20 Series Скачать руководство пользователя страница 46

Страница: 46 / 58

7 Planning IO-Link device configurations

| Editing IO-Link device configurations online

2547720000/03/09.2019

Manual Communication module UR20-4COM-IO-LINK

Activating an IO-Link port

You must be connected to the fieldbus coupler.

Activating an IO-Link port

▶

In the

device tree

, switch to the required IO-Link master.

▶

For the IO-Link port that you want to activate, click

Acti-

vate (play icon)

The “Operating mode” parameter of the IO-Link port con-

cerned is set to the value “IO-Link”. The supply voltage of the

IO-Link port is switched on. The connected IO-Link device

sends and receives process data.

Deactivating an IO-Link port

You must be connected to the fieldbus coupler.

Deactivating an IO-Link port

▶

In the

device tree

, switch to the required IO-Link master.

▶

For the IO-Link port that you want to deactivate, click

Deactivate (stop icon)

The “Operating mode” parameter of the IO-Link port con-

cerned is set to the value “Deactivated”. The supply voltage

of the IO-Link port is switched off.

Identifying a connected IO-Link device

The IO-Link port to which the IO-Link device is connected

must be activated.

Identifying an IO-Link device

The configurator can determine the identification data of a

connected IO-Link device. You can use the identification data

to find the corresponding IODD or to check whether you

have assigned the correct IO-Link device to the IO-Link port.

▶

In the

device tree

, switch to the required IO-Link master.

▶

For the IO-Link port to which the IO-Link device is con-

nected, click

Identify (magnifying class icon)

The Configurator calls up the identification data of the

IO-Link device and illustrates it in the IO-Link port overview.

If you have already assigned an IO-Link device to this

IO-Link port, the Configurator compares the identification

data of the IODD with the identification data of the connect

ed IO-Link device. Matches are highlighted in green. Devia-

tions are highlighted in red.

Downloading IODDs for a connected IO-Link device

The connected IO-Link device must be identified by the IO-

Link Configurator. Your computer must be connected to the

Internet.

Downloading IODDs

▶

In the

device tree

, switch to the required IO-Link master.

▶

For the empty IO-Link port, click

Download

IODD

which you want to add the IO-Link device.

The IODDfinder is opened in your standard browser.

▶

Search for the required IODDs and load the files onto your

computer.

Reading out IO-Link device parameters

The IO-Link device must be assigned to the IO-Link port.

The connected IO-Link device must be identified by the

IO-Link Configurator. The IODD must match the connected

IO-Link device.

Depending on the number of parameters to be read and the

capacity utilisation of the coupler, it may take a while until all

data is read.

▶

In the

device tree

, switch to the required IO-Link master.

▶

For the IO-Link device whose data you want to edit, click

Edit (cog icon)

The

detailed view

of the IO-Link device is opened.

Updating the parameters

If you want to update an individual parameter:

▶

Click the

update icon

next to the entry.

Содержание UR20 Series



























































Результаты поиска

Содержание UR20 Series

Отзывы:

Похожие инструкции для UR20 Series

Бренды по названию

Популярные бренды

Weidmuller UR20 Series, Руководство пользователя

Результаты поиска

Содержание UR20 Series

Отзывы:

Похожие инструкции для UR20 Series

Бренды по названию

Популярные бренды