Weidmuller SAI Active Universal Pro Series, Руководство пользователя

Страница: 122 / 177

Commissioning the PROFIBUS-DP
122
5663600000/1.4/09.09
Byte 2, station status 3
Bit 0 reserved Slave always sets "0"
Bit 1 reserved Slave always sets "0"
Bit 2 reserved Slave always sets "0"
Bit 3 reserved Slave always sets "0"
Bit 4 reserved Slave always sets "0"
Bit 5 reserved Slave always sets "0"
Bit 6 reserved Slave always sets "0"
Bit 7 ext_overflow 1 = Diagnostic data overflow
Byte 3, Diag. master address
FFH PB address of master FF = Parameter has still not been received from master
02H or the address of the master, which the parameter has set
Byte 4, Ident number (high byte)
0AH High byte of the ident number The ID number of the PROFIBUS device high byte
Byte 5, Ident number (low byte)
74H Low byte of the ident number The ID number of the PROFIBUS device low byte
Byte 9…10 module status module 0 (Gateway)
Byte 11…12 module status module 1
Byte 13…14 module status module 2
Byte 15…16 module status module 3
Byte 17…18 module status module 4
Byte 19…20 module status module 5
Byte 21…22 module status module 6
Byte 23…24 module status module 7
Byte 25…26 module status module 8