Notes on Safety
8
5663600000/1.4/09.09
1.1
Prescribed Use
WARNING: Danger
- Using this product beyond the specifi-
cations or disregard of using instructions
and warnings may cause grave malfunc-
tions so that personal injury and material
damages occur.
- In the case of malfunction or failure of
the SAI Module cannot be predicted the
behaviour by other connected devices of
an arrangement. Personal damages and
material damages can occur. Make only
settings, if you are informed exactly
about all effects in the whole arrange-
ment.
NOTE
This device is intended for use in appli-
cations as described in the operating in-
structions only. Any other form of usage
is not permitted and can lead to acci-
dents or destruction of the device. Any
misuse will lead immediately to the ex-
piry of all guarantee and warranty claims
on the part of the operator against the
manufacturer.
1.2
Qualified staff
These operating instructions have been written for
trained and qualified personnel who are familiar with
the valid regulations and standards applicable to the
field of application.
1.3
Accuracy of the technical
documentation
These operating instructions have been written with
due care and attention. However, unless otherwise
required by law we do not guarantee that the data,
images and drawings are accurate or complete nor
do we accept liability for their contents. Weidmuel-
ler’s general terms and conditions of sale apply in
their respective valid form.
Subject to alteration without notice.
1.4
CE label
This product fulfils the guidelines issued by the
European Union (EU) and is therefore entitled to
carry the CE mark.
1.5
Declaration of conformity
The product fulfils both the Low Voltage Directive
73/23/EEC and the EMC Directive 89/336/EEC.
Содержание SAI Active Universal Pro Series
