Diesel Gen-set Operation Instructions
2
even death because hydrogen may immediately cause an explosion if it contacts with
electric arc or spark;
2.2 When the Gen-set is operating or hot, do not add fuel into fuel tank. It would be
very dangerous if fuel contacts with hot body of diesel engine and exhaust pipe, etc.
3. Rotating parts may cause injuries or even death of operators
3.1 All rotating parts of Gen-set shall be equipped with protective cover, for example,
flywheel, fan and charging alternator, etc. shall be equipped with protective cover. In
addition, fastening condition of these rotating parts shall be inspected at a regular
interval;
3.2 Do not get close to rotating parts when wearing loose clothes because these would
be wrapped in rotating parts and cause personal injuries, or even death;
3.3 Keep your hands away from rotating parts when the Gen-set is operating.
4. High-temperature parts may cause injuries of operators
4.1 Do not open radiator cap when the Gen-set is operating or immediately after the
Gen-set is stopped, or splashed high-temperature liquid would cause injuries of
operators;
4.2 Do not try to touch exhaust pipe, turbocharger, high-temperature coolant and
other high-temperature parts of the Gen-set with your hands when the Gen-set is
operating, or your hands would be burnt;
4.3 Owing to the temperature of exhaust pipe is high and in order to prevent burns,
the pipe shall be wrapped with heat-resisting materials (e.g. glass fiber or aluminum
silicate, etc.), in order to complete thermal insulation. In addition, exhaust terminal
and exposed part of exhaust pipe shall be kept away from woods or other flammable
substances, especially the fuel piping.
II. Safety symbols
