Diesel Gen-set Operation Instructions
34
L=length of foundation, m;
F=width of foundation, m.
Suggestion: dimensions of foundation for 10~50kW Gen-set shall be 2500mm
(L)×1300mm (W)×200mm (H).
3. Transportation of the Gen-set
Common chassis of Weichai Gen-set is designed with lifting eye and forklift groove
and the Gen-set can be transported and installed by using crane or forklift.
When crane is used, in order to prevent the Gen-set from being titled when being
lifted up, four steel wire ropes whose length is the same shall be used. In addition,
these steel wire ropes shall have enough strength and carrying capacity of lifting tools
shall meet requirements of safety specifications. When being lifted, the Gen-set shall
be kept horizontal and lifted slowly, in order to prevent the Gen-set from swinging
and prevent steel wire ropes from tied during lifting.
When using forklift, be sure to hold up the Gen-set slowly or carefully push or pull
from base of the Gen-set.
Note: parts of the Gen-set would be seriously damaged if incorrect
transportation method is adopted.
Note: do not lift up the Gen-set from lifting eyes on diesel engine or alternator.
Note: check if suspension equipment and supports are in good conditions and if
load weight of suspension equipment is proper.
