Diesel Gen-set Operation Instructions
54
1) Remove loads at first, proceed to switching-off operation and let the Gen-set
operate without load for 3~5 minutes after being unloaded;
2) Press stop button
, stop electromagnet operates, pull stop handle to stop
position to stop operation of the Gen-set;
3) Finally, turn power switch to “OFF” position to cut off power supply of the entire
control system;
4) Remove connecting cable from negative electrode of battery and protect it with
insulation tape.
3.2 Emergency stop
In an emergency stop, press emergency stop button or rapidly push fuel injection
pump stop control handle to “OFF” position.
Note: do not activate emergency stop at random unless a special emergency occurs.
If any abnormality occurs during commissioning, carry out troubleshooting with the
method introduced in Chapter 10.
