WaxJet 6100, Справочное руководство по обслуживанию

Страница: 48 / 131

ROLLOVER TIME
•
All models
This sets the time of day when the system date is advanced. If set
to before 1200, the date change will lag the real date. If set to
after 1200, the date change will lead the real date. There are
three 2-digit fields concatenated as Hours, Minutes, Secs.
At the command prompt, the keystrokes are
R O
Enter the altered time with the numeric values for hour, minute,
and seconds. Use the following format: HH: MM: SS
Acceptable entries are between 00:00:00 (midnight) to 23:59:59 (1
second before midnight).
The arrow keys, A l r
,
can be used for changing only part
of the time.
ASCII String
To cause the date to advance at 11:05:20 PM, enter:
RO230520<CR>
SAVE GROUP [0-31]
•
All models
Certain settings may be saved into 1 of 32 parameter group
storage locations. This is useful for later recalling a known
correct set of parameters using CALL command.
At the command prompt, the keystrokes are
S A
A parameter group can be saved to thirty-two different file
locations. When a file is saved and then edited afterwards, it
must be saved again before exiting or the changes will be lost.
The parameters saved in the parameter group position are:
BOLD, DELAY, EXP. DATE, GAP, INVERT, NUMBERS, POSITION,
SELECT, REVERSE, and WIDTH.
ASCII String
To save the current settings to group #04, enter:
SA4<CR>
5-14 Command Definitions