WaxJet 6100, Справочное руководство по обслуживанию

Страница: 30 / 131

External
Programming
The Rear Port provides for external communications via RS-232 or
RS-485 protocol, using 8 data bits, no parity bit, and 1 stop bit.
External programming requires a thorough understanding of the
command structure and definitions of the FoxJet printer. This
information can be found in Chapter Five.
External Programming (or Rear Port Programming) is accomplished
with ASCII command strings.
Some ASCII characters have special functions such as Carriage
Return (designated as CR , hex value 0D), Line Feed (0A) , Form
Feed (0C), and Control F (06).
Many of the two letter commands detailed in Command Definitions
pertain to individual heads. When the commands are received, the
printer applies those changes to the Current Head only. The
Current Head defaults to Head A and may be changed with the
HE
ad command (see Command Definitions). Please refer to the
Command Definitions for a more complete description of which
commands apply to single heads, dual heads, and all heads.
Note: The WaxJet system will not be configured with
multi-head capabilities .
Download times are 1 millisecond per bit when using 9600 baud.
The FoxJet printer will take an average of 30 to 45 milliseconds to
decode and compile print jobs. If more specific information
concerning decode and compile times are needed, contact your
FoxJet Authorized Technical Support Representative.
4-4 Programming