WaxJet 6100, Справочное руководство по обслуживанию

Страница: 44 / 131

WIDTH [1-255]
•
All models
•
Selected head
This command will adjust the horizontal print resolution. The
WIDTH value will be divided into the encoder pulse train
frequency or the internal clock frequency to create Printhead
firing pulses.
For example, using a WIDTH value of 2 with a 300 DPI encoder
assembly would generate pulse train for 150 DPI printing.
Any change in WIDTH value will require a change in DELAY
value and the SLANT or OFFSET (1.9” Series 7 printheads)
value.
At the command prompt, the keystrokes are
W I
ASCII String
To set the WIDTH to 5, enter:
WI5<CR>
Utility
Commands
Utility commands are used for special functions, diagnostics and
some other printing features.
BACKUP [Y/N]
•
All models (415 firmware and above)
When BACKUP is enabled, an ASCII string is output to the Rear
Port that contains all Message and Parameter information. A
host PC utilizing a text capture function can save the string on a
PC for future Message/Parameter reloads. Keystrokes to initiate
a BACKUP are
B U
,
then select
Y
to initiate. To restore, just
send text file from PC to controller. NETWORK (NE) command
must be set N.
ASCII String
To initiate BACKUP, enter:
BUY<CR>
5-10 Command Definitions