Waupaca Paca-Ryde, Руководство по установке

Страница: 34 / 72

1726 North Ballard Road - Appleton, WI 54911 - 920.991.9082
Technical Support 800.238.8739 - TechSupport@WaupacaElevator.com
PTM30112-G
12/07/2012
W
E
CRUSH
HAZARD
CUTTING
HAZARD
CRUSH
HAZARD
CRUSH
HAZARD
FALLING
HAZARD
CRUSH
HAZARD
PINCH
HAZARD
PUNCTURE
HAZARD
F RA MELE SS CAR
ASS EMBLY
S E R IE S :
015 - 016 - 018 - 115 - 116 - 118
C
A
B
D
C
A
B
E
D
C
A
B
E
D
F
8
10
14
12
Step
8
Carefully lift at the connecting corner and connect the pins in wall D into the fasteners in wall B .
Step
9
Drive dowels from fl oor A into wall D with a rubber mallet to prevent walls from moving or sliding.
Step 10 Set wall E into place. Carefully lift wall E at the connecting corner and connect the pins in wall E
into the fasteners in wall D .
Step
11
Drive dowels from fl oor A into wall E with a rubber mallet to prevent walls from moving or sliding.
Step 12 Set ceiling F onto walls B , C , D and E with dowels.
Step
13
Use rubber mallet to drive dowels through the ceiling and into walls.
Step 14 Fasten ceiling fi rst then fl oor panel to walls with provided hardware in
pre-drilled locations.
Verify fl ush alignment across top of walls and gate pocket. U se a rubber mallet to bring the walls into
alignment. Do not rely on ceiling screws to close gaps. C heck to make certain all fasteners are seated
completely and all walls are level.
8
10
14
12
Note:
Use a small
amount of wax
or liquid soap
for lubricating
hardware.
VERIFY ALL FASTENERS ARE SECURE!
S upport walls during assembly. Tilting forwards or backwards on dowels could result in damage to the
walls and/or fasteners and prevent proper assembly of car. D o not allow walls to slide off the fl oor this
may cause harm to yourself and the walls.
Page 34