Sound Parameters
75
Iridium Manual
K1...6 LowSplit
defines a low key split point for level
scaling.
K1...6 HighSplit
defines a high key split point for level
scaling.
K1...6 Level
controls the overall level of the kernel signal.
This parameter is identical to the corresponding parame-
ter on the Env page.
K1..6 LevelScale
is an overall level scaling with three
different modes. This parameter is identical to the corres-
ponding parameter on the Env page.
•
Linear
controls the amplitude in a direct way, such
that a linear envelope segment also controls the
amplitude linearly.
•
Quad
controls the level in a more curved way by rising
the envelope level to the forth power.
•
dB
lets the envelope control the level on a dB scale.
K1...6 OutPan
determines how the kernel signal (which
itself is mono) is panned to the oscillator stereo output.
This is of course only valid for kernels that have been
activated to send to the output by the
Out
button. This
parameter is identical to the corresponding parameter on
the Env page.
In addition the level can be adjusted in accordance to the
played key. If you have set a low and a high key split point.,
you can rise or lower the curve depending on the
K1...6
Low and HighBias
parameter. Split points and bias can
also be graphically edited by tapping and moving your
finger up or down.
r
The sometimes extreme sonic effect of FM and simi-
lar modulation types makes it necessary to adjust
the level in higher or lower ranges to get an overall
satisfying sonic result.
The Controls Display Page
Tap on one the
Controls
button to switch to the Controls
dispaly page. If one of the kernels is edited, please tap an
the
Patch
button before.
This page lets you determine which effect each of the 5
dials aka template macro parameter has. In fact, each
kernel oscillator has a little internal modulation matrix
that controls which kernel parameters are affected by the
knob macro value.
