Sound Parameters
116
Iridium Manual
Shape
Determines the shape of the LFO waveform, which is used
for the flanger modulation. You can select between a sine
and a triangle waveform.
Tap on the corresponding effect parameter to open a pop-
up menu for further settings (not all settings are available
for all effect parameters):
•
Normal
: parameter change is about 1%.
•
Fine
: parameter change is about 0.1%.
•
Super Fine
: parameter change is about 0.01%.
•
Set Default
: sets the parameter to its default value.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
Modulations
: opens the
Mod
menu to sets up a modu-
lation for this parameter. How to set up a modulation
can be read in ‘The Modulation Mode’
chapter.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Delay
A Delay is an effect that produces echoes of the input sig-
nal.
Dry/Wet
This parameter controls the volume ratio between the
original signal and the effect output. If set to
0%
, the dry
signal is sent to the output only so that no effect can be
heard. Higher values will increase the effect signal. At
maximum setting of
100%
the pure effect signal will be
heard.
