Basic Operation
25
Iridium Manual
board. The program name can use up to 40 cha-
racters. Tap on
Return
to confirm. Tap on
Cancel
to cancel the naming procedure.
3.
Tap on the
Bank
name to open a pop-up menu
for selecting a desired sound bank. You can also
add a new bank by tapping on
+
next to the
bank name.
4.
Tap on the
Author
name to select a desired au-
thor in the pop-up menu. You can also add a
new author name by tapping on
+
next to the
author name.
5.
You can also choose up to four attributes for
your sound. Tap on the corresponding
Attribu-
te
1
to
4
on the touchscreen to open a pop-up
menu selection list. Select the desired attribute.
You can also add a new attribute by tapping on
+
next to the corresponding attribute name. It is
strongly recommended to select an appropriate
attribute for your sound. This helps you to lo-
cate your sound later.
6.
Use the
Prev
/
Next
button or the
Selection
dial
to select the desired sound program number,
where the sound is saved to. Alternatively, tap
on the number field at the bottom of the screen
to enter the sound program number manually.
7.
Finally, tap on
Save
on the touchscreen to store
the sound program at the selected location.
8.
By tapping on
Cancel
in the touchscreen or
pressing any button on the front panel, you can
discard the storing process at any time.
s
Whenever you save a program, the selected memory
location is overwritten. Therefore, any previously
stored program at this location will be erased and
there is no way to get it back. So, you should do
backups of your sounds regularly by using
Export
in
the Load screen´s
Action
pop-up menu.
r
Use the
Save
function for copying sound programs.
There is no need to edit a program before storing it.
