Basic Operation
24
Iridium Manual
As soon as the value
0
is reached, the sweep is stopped for
a short period to make it easier to edit Iridium.
r
For each parameter the original value from the
loaded patch is indicated by a vertical bar in the
main bottom area and in the encoder displays.
r
A useful hint: Press a button above the display se-
veral times to switch through the corresponding
function tabs.
r
Read more about basic settings for the knobs in ‘The
Global Page’ chapter.
g
Want to start with a clean initialized sound?
By tapping on the Init button, you can initialize the
current loaded sound. No sound program is
overwritten during this action. If in Single Layer
mode, a popup window will open where you can
choose, if the current selected layer (Current) or
the complete sound program (Reset) will be initia-
lized. If Reset is chosen, the initialized sound pro-
gram will be a single layer program.
Saving Programs
After you have finished editing a sound program you must
save it if you intend to use it again. All of Iridium’s memory
locations are available for this purpose.
=
To save a sound program:
1.
Press the
Save
button to acti-
vate the Save Preset page. The
Save
button is lit red.
2.
Edit the
Name
(if desired). Tap on
the sound
name
on the touchscreen to open a virtual key-
