Loading & Editing Samples
187
Iridium Manual
Sample Start / Sample End
Here you determine the start position (
Sample Start
) and
end position (
Sample End
) of the currently selected samp-
le. Use this function to adapt the sample length to your
needs. Within the waveform representation two green
rulers shows the loop start and end.
Tap on
Sample Start
or
Sample End
to open a pop-up
menu for further settings:
•
Normal
: parameter change is normal.
•
Fine
: parameter change is fine.
•
Super Fine
: parameter change is super fine.
Pitch
Determines the pitch of the currently selected sample. Use
this parameter to tune samples that don’t match with your
desired tone pitch.
Tap on
Pitch
to open a pop-up menu for further settings:
•
Normal
: Pitch change is about 10.0 cents.
•
Fine
: Pitch change is about 1.0 cents
•
Super Fine
: Pitch change is about 0.1 cents.
•
Set From Keys
: play a key on your keyboard to set the
corresponding pitch.
Loop Start/ Loop End
If
Loop Mode
is set to
On
, you can define a
Loop Start
and
Loop End
. Within the waveform representation two yel-
low rulers shows the loop start and end.
Tap on
Loop Start
or
Loop End
to open a pop-up menu for
further settings:
•
Normal
: parameter change is normal.
•
Fine
: parameter change is fine.
•
Super Fine
: parameter change is super fine.
Direction
Determines the playback direction of the sample. (
Forward
or
Backward
)
Loop Mode
Determines if the sample loop is active (
On
) or not (
Off
). A
third option is
Ping Pong
which lets the loop moving for-
wards and backwards again and again.
