Sound Parameters
129
Iridium Manual
Control Amount
Determines an additional amount for the selected
Control-
ler
.
Amount
and
Control Amount
is summed up to the
total amount.
Tap on
Control Amount
to open a pop-up menu for
further settings:
•
Normal
: parameter change is about 2%.
•
Fine
: parameter change is about 0.2%.
•
Super Fine
: parameter change is about 0.02%.
•
Set Default
: sets the parameter to its default value of
+0.0%.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Active Button
Select a desired modulation entry. Tap on the
Active
but-
ton to disable the corresponding modulation assignment.
The button is labeled ‘Disabled’ and the modulation slot is
greyed out. Use this to temporarily bypass a modulation.
Tap on Disabled to activate the modulation again.
Clear Slot Button
Select a desired modulation entry. Tap on the
Clear Slot
button to delete this modulation assignment.
Clear All Button
Tap on this button to delete all modulation assignments
that are shown in the modulation matrix. A confirmation to
finish this process is necessary.
Modulation Matrix List
The matrix list shows all currently made modulations. If a
Controller
is selected, it will also be shown in the
Source
column. If a
Control Amount
is set, it will also be shown as
a separate bar in the
Amount
column.
