Sound Parameters
117
Iridium Manual
Feedback
Controls the amount of signal that is routed back into the
Delay line. Lower values, therefore, produce fewer echoes
than higher values.
Delay-L
Sets the length of the Delay tap for the left channel in milli-
seconds or rather seconds. If
Sync
is activated, the delay
length can be entered in musical values.
PingPongPan
Controls the feedback send from the left channel to the
right one and vice versa.
Decouple
This parameter delays the synced delay differently for the
right and the left channel. This leads to a less static delay
sound.
Delay-R
Sets the length of the Delay tap for the right channel in
milliseconds or rather seconds. If
Sync
is activated, the
delay length can be entered in musical values.
Sync
Synchronizes the delay to the internal tempo of the Iridi-
um. If activated, you can set up
Delay-L
and
Delay-R
in
musical values.
LR Linked
If this parameter is set to on, both delay signals (Delay-L
and Delay-R) work as one signal.
Delay-L
is used to set the
delay length;
Delay-R
has no function.
HighCut
Dampens the high frequencies produced by the Delay
effect. This filter is routed before the feedback circuitry
meaning that adjacent taps of the Delay will be dampened
further. This creates the typical ‘high frequency loss’ that
often happens in natural echoes. A minimal setting means
that the signal isn’t filtered, while higher settings filter the
high frequencies of the feedback signal.
LowCut
Dampens the low frequencies produced by the Delay
effect.
Tap on the corresponding effect parameter to open a pop-
up menu for further settings (not all settings are available
for all effect parameters):
