Sound Parameters
108
Iridium Manual
•
Set Default
: sets Sync to its default
Off
setting
.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Mode
When set to
Global
, the LFO phases of all voices are synced
so that they sound as one LFO. This can be interesting
when the LFO is applied to modulate
Cutoff
. If set to
Poly
,
every note triggers its own LFO.
Tap on
Mode
to open a pop-up menu for further settings:
•
Set Default
: sets Mode to its default
Poly
setting
.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Slew
Determines the slew rate of the selected LFO waveform.
The higher the setting, the smoother the slew rate. Higher
settings also change the phase from a bipolar LFO wave-
form to nearly unipolar.
Tap on
Slew
to open a pop-up menu for further settings:
•
Set Default
: sets Slew to its default value of
40.0%
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Phase
Controls the initial phase of the corresponding LFO when a
new note is started.
Free
means that the LFO isn’t restarted
on a new note but runs freely while other values set the
LFO phase to the respective offset in degrees.
Tap on
Phase
to open a pop-up menu for further settings:
•
Set Default
: sets Phase to its default setting of
0.0 deg.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
