Waldorf IRIDIUM, Руководство пользователя

Страница: 106 / 215

Sound Parameters
106 Iridium Manual
•
Fine : Speed change is about 0.28 Hz.
•
Super Fine : Speed change is about 0.028 Hz.
•
Set Default : sets Speed to its default value of 6.25 Hz .
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
Modulations : opens the Mod menu to sets up a modu-
lation for this parameter. How to set up a modulation
can be read in ‘The Modulation Mode’
chapter.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Warp
Depending on the selected LFO Shape , the Warp parame-
ter folds the corresponding waveform. Here are the results
for the different LFO waveforms:
•
If Sine is selected, positive or negative values compress
the upper or lower phase of the waveform.
•
If Triangle is selected, higher values turn the wave
into a rising sawtooth wave while lower values create a
falling sawtooth wave.
•
If Square is selected, Warp changes the pulsewidth of
the waveform.
•
If Saw (down or up) is selected, the waveform is
folded. Settings below 0.00% also reduce the LFO phase
from bipolar to unipolar.
•
If S&H (Sample & Hold) is selected, Warp shapes the
edges of the held waveform and smooths it.
Tap on Warp to open a pop-up menu for further settings:
•
Normal : Warp change is about 2.0 %.
•
Fine : Warp change is about 0.2 %.
•
Super Fine : Warp change is about 0.02 %.
•
Set Default : sets Warp to its default value of +0.0% .
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
All Amounts
See corresponding description in the ‘LFO Panel Parame-
ters’ chapter.
Tap on All Amounts to open a pop-up menu for further
settings: