Sound Parameters
135
Iridium Manual
The Presets Button
Tap on the
Presets
button to open a pop-up window for
loading, saving, and managing Komplex Modulator set-
tings. For more information on the available options please
refer to the
Presets
chapter in the Wavetable section.
The Curve A & B Tabs
Here you can edit the two curves A and B. Tap on the but-
ton
Curve A
or
Curve B
to open the corresponding edit
page.
r
Curve A and B use the same parameters for editing.
Editing Curves within the Curve Graphic
To edit a curve in the graphic display you can do the follo-
wing:
•
Tap on the corresponding step and move your finger
up or down to change its level. The selected step is lit
in red.
•
You can also tap and hold a step and move your finger
to the left or to the right to draw the level of the steps
in one go.
•
If you double tap above or below a step, the level jumps
immediately to this position.
r
For more precise editing of steps we recommend
using the corresponding display page parameters.
Step A/B
Selects a desired step for further editing. The current sel-
ected step is lit in red.
Num Steps A/B
Determines the number of available steps. Here you can
set up step numbers from a minimum of two through to a
maximum of 32.
