Sound Parameters
114
Iridium Manual
Shape
Determines the shape of the LFO waveform, which is used
for the chorus modulation. You can select between a sine
and a triangle waveform.
Stages
Determines the numbers of stages that are used for the
Chorus effect. The Chorus offers four chorus types with
either two, four, six, or eight independent delay lines, whe-
re half of them are routed to the left input and output and
the others to the right input and output.
HighCut
Reduces the high frequencies of the chorus signal.
LowCut
Reduces the low frequencies of the chorus signal.
Tap on the corresponding effect parameter to open a pop-
up menu for further settings (not all settings are available
for all effect parameters):
•
Normal
: parameter change is about 1%.
•
Fine
: parameter change is about 0.1%.
•
Super Fine
: parameter change is about 0.01%.
•
Set Default
: sets the parameter to its default value.
•
Set Last Loaded
: resets the parameter to the last
loaded value from the current sound patch.
•
Modulations
: opens the
Mod
menu to sets up a modu-
lation for this parameter. How to set up a modulation
can be read in ‘The Modulation Mode’
chapter.
•
MIDI Learn CC
: activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
