manualshive.com logo in svg

VTI Instruments EX1629, Руководство пользователя


Поделиться
Скачать
background image

www.vtiinstruments.com 

EX1629 Command Set 

307 

Error Code  Error Message 

Meaning 

FFBFFC0A91  VTEX1629_ERROR_DIO_CONFLICT_DUPLICATE_ENTRY 

Requested event configuration conflicts 
with existing configuration for the input 
event and/or output action specified. 

FFBFFC0A92  VTEX1629_ERROR_DIO_INVALID_INPUT_LINE 

Invalid digital input line. 

FFBFFC0A93  VTEX1629_ERROR_DIO_INVALID_OUTPUT_LINE 

Invalid digital output line. 

FFBFFC0A94  VTEX1629_ERROR_DIO_INVALID_INPUT_EVENT 

Invalid input event. 

FFBFFC0A95  VTEX1629_ERROR_DIO_INVALID_OUTPUT_ACTION 

Invalid output action. 

FFBFFC0A96  VTEX1629_ERROR_QTR_BRIDGE_NOT_SELECTED 

Channel is not in quarter bridge 
configuration. 

FFBFFC0A97  VTEX1629_ERROR_TRIGINIT_NEED_SOFTSYNC 

Triginit needs softsync first. 

FFBFFC0A98  VTEX1629_ERROR_FS_NOT_SUPPORTED_FOR_DYNAMIC_EXCITATION_EU 

Sampling frequency greater than 1 kHz 
not supported while in current mode. 

FFBFFC0A99  VTEX1629_ERROR_DYNAMIC_EXCITATION_EU_NOT_SUPPORTED_AT_CURR_FS 

This mode is not supported while 
sampling rate is greater than 1 kHz. 

FFBFFC0A9A  VTEX1629_ERROR_DYNAMIC_EXCITATION_EU_CONF_EXCITEOUT_SRC_NOT_ENABLED  The confidence sources 

VTEX1629_CONFSRC_EXCITE_POS 
and 
VTEX1629_CONFSRC_EXCITE_NEG 
must be in the confidence scanlist in 
order to enable dynamic excitation EU. 

FFBFFC0A9B  VTEX1629_ERROR_DYNAMIC_EXCITATION_EU_NEEDS_CONF_EXCITEOUT_SRC 

Can not disable confidence excitation 
source while dynamic EU conversion is 
in progress. 

FFBFFC0A9C  VTEX1629_ERROR_CONF_LIMIT_INVALID_REPORTING_TYPE 

Invalid reporting type. 

FFBFFC0A9D  VTEX1629_ERROR_BRIDGE_LIMIT_NOT_SUPPORTED_AT_CURR_FS 

Can not enable bridge limit checking 
when the bridge sampling frequency is 
greater than 1 kHz. 

FFBFFC0A9E  VTEX1629_ERROR_FS_NOT_SUPPORTED_FOR_BRIDGE_LIMIT_CHECKING 

Can not set sampling frequency greater 
than 1 kHz while in the current mode. 

FFBFFC0A9F  VTEX1629_ERROR_CONF_LIMIT_NOT_SUPPORTED_AT_CURR_FS 

Summary reporting or detailed reporting 
not supported for sampling frequency 
greater than 1 kHz. 

FFBFFC0AA0  VTEX1629_ERROR_FS_NOT_SUPPORTED_FOR_CONF_LIMIT_CHECKING 

Can not set sampling frequency greater 
than 1 kHz while in current mode. 

FFBFFC0AA1  VTEX1629_ERROR_HW_DOES_NOT_SUPPORT_CONF_EXCITEOUT_BUFF_SRC 

Current hardware prohibits enabling 
EXCITEOUT_BUFF. This is only 
available on newer hardware revisions. 

FFBFFC0AA2  VTEX1629_ERROR_CAL_FILE_NOT_PRESENT 

Calibration file not present. 

FFBFFC0AA3  VTEX1629_ERROR_CAL_FILE_TOO_LARGE 

Calibration file too large. 

FFBFFC0AA4  VTEX1629_VXI11_ERROR_NO_ERROR 

VXI11 No error. 

FFBFFC0AA5  VTEX1629_VXI11_ERROR_SYNTAX_ERROR 

VXI11 Syntax error. 

FFBFFC0AA6  VTEX1629_VXI11_ERROR_DEVICE_NOT_ACCESSIBLE 

VXI11 Device not accessible. 

FFBFFC0AA7  VTEX1629_VXI11_ERROR_INVALID_LINK_IDENTIFIER 

VXI11 Invalid link identifier. 

FFBFFC0AA8  VTEX1629_VXI11_ERROR_PARAMETER_ERROR 

VXI11 Parameter error. 

FFBFFC0AA9  VTEX1629_VXI11_ERROR_CHANNEL_NOT_ESTABLISHED 

VXI11 Channel not established. 

FFBFFC0AAA  VTEX1629_VXI11_ERROR_OPERATION_NOT_SUPPORTED 

VXI11 Operation not supported. 

FFBFFC0AAB  VTEX1629_VXI11_ERROR_OUT_OF_RESOURCES 

VXI11 Out of resources. 

FFBFFC0AAC  VTEX1629_VXI11_ERROR_DEVICE_LOCKED_BY_ANOTHER_LINK 

VXI11 Device locked by another link. 

FFBFFC0AAD  VTEX1629_VXI11_ERROR_NO_LOCK_HELD_BY_THIS_LINK 

VXI11 No lock held by this link. 

FFBFFC0AAE  VTEX1629_VXI11_ERROR_IO_TIMEOUT 

VXI11 IO timeout. 

FFBFFC0AAF  VTEX1629_VXI11_ERROR_IO_ERROR 

VXI11 IO error. 

FFBFFC0AB0  VTEX1629_VXI11_ERROR_INVALID_ADDRESS 

VXI11 Invalid address. 

FFBFFC0AB1  VTEX1629_VXI11_ERROR_ABORT 

VXI11 Abort. 

FFBFFC0AB2  VTEX1629_VXI11_ERROR_CHANNEL_ALREADY_ESTABLISHED 

VXI11 Channel already established. 

FFBFFC0AB3  VTEX1629_ERROR_BRIDGE_LIMIT_CHECKING_NOT_SUPPORTED_AT_CURR_FS 

Bridge limit checking not supported at 
current sampling frequency. 

FFBFFC0AB4  VTEX1629_ERROR_FS_NOT_SUPPORTED_WHEN_BRIDGE_LIMIT_CHECKING_ENABLED  Sample frequency not supported when 

bridge limit checking is enabled. 

Содержание EX1629



























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EX1629

Badger Meter LM-OG-P2 Advanced Installation And Operation Manual preview
LM-OG-P2 Advanced
Бренд: Badger Meter Страницы: 48
Badger Meter epm-3 User Manual preview
epm-3
Бренд: Badger Meter Страницы: 24
Bahco BDACM1000 User Manual preview
BDACM1000
Бренд: Bahco Страницы: 92
Landis+Gyr ULTRAHEAT T230 Manual preview
ULTRAHEAT T230
Бренд: Landis+Gyr Страницы: 26
Landis+Gyr Ultracold T550 Operating Instructions preview
Ultracold T550
Бренд: Landis+Gyr Страницы: 3
janitza UMG 96RM-P Manual preview
UMG 96RM-P
Бренд: janitza Страницы: 48
Bamo BAMOFLONIC Instruction Manual preview
BAMOFLONIC
Бренд: Bamo Страницы: 17
GREISINGER G 1690 Quick Reference Manual preview
G 1690
Бренд: GREISINGER Страницы: 20
Bühler technologies S-SM Installation And Operation Instruction Manual preview
S-SM
Бренд: Bühler technologies Страницы: 33
Kawai CA901 Owner'S Manual preview
CA901
Бренд: Kawai Страницы: 110
LaserLiner 082.214A Manual preview
082.214A
Бренд: LaserLiner Страницы: 64
Pilot Communications PMAC615 Installation & Operation Manual preview
PMAC615
Бренд: Pilot Communications Страницы: 34
YOKOGAWA WT332 User Manual preview
WT332
Бренд: YOKOGAWA Страницы: 123
Technitone SX-2800A Operating Instructions Manual preview
SX-2800A
Бренд: Technitone Страницы: 16
DAKOTA ULTRASONICS PZX-7 Operation Manual preview
PZX-7
Бренд: DAKOTA ULTRASONICS Страницы: 51
Hanna Instruments HI5221 Instruction Manual preview
HI5221
Бренд: Hanna Instruments Страницы: 84
Hanna Instruments HI 93712 Instruction Manual preview
HI 93712
Бренд: Hanna Instruments Страницы: 2
Medical International Research spirobank G User Manual preview
spirobank G
Бренд: Medical International Research Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды