manualshive.com logo in svg

VTI Instruments EX1629, Руководство пользователя


Поделиться
Скачать
background image

www.vtiinstruments.com 

EX1629 Programming 

79 

To  allow  added  flexibility  for  more  complicated  multi-box  configurations,  the  sample  clock  can 
also  be  output  on  one  trigger  bus  line  and  input  on  another.  This  functionality  is  useful  in  star 
multi-box configurations. For example, the master device can be configured to output the clock on 
LXI0.  A  trigger  bus  hub  can  be  utilized  to  receive  this  clock  on  LXI0  and  distribute  it  to  the 
master and slave devices on LXI4. The master device can then be configured to receive its clock 
on LXI4 instead of using the clock that it is outputting on LXI0. This allows the master and slave 
devices to use the same clock from the trigger bus hub instead of the master using one clock and 
the slaves using the same clock but with the added phase delay of the trigger bus hub. 

The  vtex1629_set_sample_clock_source  instrument  driver  function  is  used  to  configure  the 
sample clock source. For a master or standalone device, the 

sampleClockMode

 parameter should 

be  set  to  VTEX1629_SAMP_CLK_MODE_MASTER.  The 

outLine

  parameter  specifies  the 

trigger bus line that is used to output the clock. This can be either one of the trigger bus lines or 
can  be  set  to  VTEX_LXI_LINE_NONE  to  use  the  internal  sample  clock  line.  The 

inLine

 

parameter specifies what line is used by the device for its ADC clock. This may or may not be the 
same  as  the  lines  that  is  specified  to  output  the  clock  via  the  outLine  parameter.  As  with  the 

outLine

 parameter, specifying an input line of VTEX_LXI_LINE_NONE will instruct the device 

to  use  the  internal  sample  clock  line.  In  the  case  of  a  stand  alone  device  that  uses  the  internal 
sample clock line, both the input and the output lines are set to VTEX_LXI_LINE_NONE. 

If a trigger bus line will be used for distributing the sample clock or for receiving a clock back into 
the  device  from  an  external  source,  it  must  be  configured  prior  to  configuring  the  sample  clock. 
Regardless  of  whether  the  sample  clock  is  only  used  within  the  device  or  if  it  is  distributed  to 
other devices, the trigger bus line that is used to output the sample clock (specified by the 

outLine

 

parameter) must be configured as an output using the vtex1629_set_lxibus_configuration function. 
If this line will only be used within the device, the transmission scope for the line should be set to 
internal transmission only. If the sample clock output is intended to be driven out on the external 
trigger bus, the transmission scope must be set for external and internal transmission. If the sample 
clock  is  input  on  different  trigger  bus  line  than  it  is  output,  the  input  trigger  bus  line  must  be 
configured  as  an  input  with  external  and  internal  transmission  scope  using  the 
vtex1629_set_lxibus_configuration  function.  When  the  internal  sample  clock  line  is  used, 
configuration of the trigger bus lines is not required. 

Sample  clock  configuration  on  a  slave  device  is  much  simpler  than  that  of  a  master  device. The 
vtex1629_set_sample_clock_source function is used to specify a 

sampleClockMode

 parameter of 

VTEX1629_SAMP_CLK_MODE_SLAVE  as  well  as  indicating  the  trigger  bus  line  that  will  be 
used to receive the sample clock. The trigger bus line must be configured as an input with external 
and internal transmission scope. 

ADC Synchronization 

Configuration of the  ADC synchronization signal is  similar to configuration of the  ADC sample 
clock. Standalone and master devices are similar in that they are both configured with a 

syncMode

 

parameter  of  VTEX1629_SYNC_MODE_MASTER  using  the  vtex1629_set_synch_source 
function. As a standalone or master device, synchronization pulses are generated on the specified 
synchronization  signal  line  using  the  vtex1629_soft_synch  function.  The 

outLine

  parameter  for 

this function is used to specify which trigger bus line is used to output the synchronization signal. 
It can either specify one of the trigger bus lines or a dedicated internal synchronization signal line. 
As  with  the  ADC  sample  clock  source,  the  synchronization  signal  can  be  configured  to  only  be 
used  within  the  device  or  to  be  output  to  other  devices  using  the  external  trigger  bus.  To  allow 
flexibility, the synchronization signal can be received back into the device on a different line than 
the one on which it is output. As with the ADC sample clock, any trigger bus lines that are used 
for  the  synchronization  signal  must  be  properly  configured  as  inputs  or  outputs  and  with  the 
proper transmission scope before they can be used for the synchronization signal. For a standalone 
device,  the  synchronization  signal  is  typically  configured  to  use  the  internal  dedicated 
synchronization 

signal 

line 

by 

setting 

both 

the 

input 

and 

output 

lines 

to 

VTEX1629_LXI_LINE_NONE. 

Содержание EX1629



























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EX1629

ABQ Industrial TI-25MX Instruction Manual preview
TI-25MX
Бренд: ABQ Industrial Страницы: 15
ABQINDUSTRIAL HT-4000 User Manual preview
HT-4000
Бренд: ABQINDUSTRIAL Страницы: 3
Cannon CAV 4.2 Operation Manual preview
CAV 4.2
Бренд: Cannon Страницы: 64
Cannon CAV 4.1 Operation Manual preview
CAV 4.1
Бренд: Cannon Страницы: 73
D-tect Systems rad-DX Installation And Operating Instructions Manual preview
rad-DX
Бренд: D-tect Systems Страницы: 19
Valcom V9992 Datasheet preview
V9992
Бренд: Valcom Страницы: 1
Det-Tronics 95-8632 Instructions Manual preview
95-8632
Бренд: Det-Tronics Страницы: 18
Bitzer KT-170-4 Technical Information preview
KT-170-4
Бренд: Bitzer Страницы: 8
Major tech MTD75T Instruction Manual preview
MTD75T
Бренд: Major tech Страницы: 20
Deprag 385484 A Operating Instruction Booklet preview
385484 A
Бренд: Deprag Страницы: 28
Pilot Communications PMAC615 Installation & Operation Manual preview
PMAC615
Бренд: Pilot Communications Страницы: 34
Megasat Digital 1 User Manual preview
Digital 1
Бренд: Megasat Страницы: 25
Thermocable ProH2O Application Manual preview
ProH2O
Бренд: Thermocable Страницы: 10
PowerMetrix PowerMaster MTA15Z Product Manual preview
PowerMaster MTA15Z
Бренд: PowerMetrix Страницы: 13
Velleman DVM401 Manual preview
DVM401
Бренд: Velleman Страницы: 18
ICP DAS USA PMC series User Manual preview
PMC series
Бренд: ICP DAS USA Страницы: 340
Molectron ENERGY MAX EM400 User Manual preview
ENERGY MAX EM400
Бренд: Molectron Страницы: 40
Tusa ZEN AIR IQ-950 Owner'S Manual preview
ZEN AIR IQ-950
Бренд: Tusa Страницы: 137

Бренды по названию

Популярные бренды

Загрузить еще бренды