manualshive.com logo in svg

VTI Instruments EX1629, Руководство пользователя


Поделиться
Скачать
background image

VTI Instruments Corp. 

308 

EX1629 Command Set 

Error Code  Error Message 

Meaning 

FFBFFC0AB5  VTEX1629_ERROR_CONF_LIMIT_CHECKING_NOT_SUPPORTED_AT_CURR_FS 

Confidence limit checking not supported 
at current sampling frequency. 

FFBFFC0AB6  VTEX1629_ERROR_FS_NOT_SUPPORTED_WHEN_CONF_LIMIT_CHECKING_ENABLED 

Sample frequency not supported when 
confidence limit checking is enabled. 

FFBFFC0AB7  VTEX1629_ERROR_INVALID_COEFFICIENT_SELECTOR 

Invalid coefficientSelector. 

FFBFFC0AB8  VTEX1629_ERROR_XML_PARSE_ERROR 

Error parsing XML file. File structure 
might be incorrect. 

FFBFFC0AB9  VTEX1629_ERROR_FAILED_TO_LOAD_FACTORY_CAL 

Unable to download nominal factory 
calibration file from instrument for use in 
reporting self-calibration coefficients. 

FFBFFC0ABA  VTEX1629_ERROR_PASSED_IN_ARRAYS_NOT_LARGE_ENOUGH 

The passed in array(s) are not large 
enough to store all the requested data 
from the instrument. 

FFBFFC0ABB  VTEX1629_ERROR_SENSOR_LED_LIT_UP_ON_ANOTHER_CHANNEL 

Only one sensor LED can be on at a 
time. 

FFBFFC0ABC  VTEX1629_ERROR_TEDS_OPS_NOT_SUPPORTED_DURING_SENSOR_IDENTIFY 

TEDS operations not allowed on the 
same analog board (channels 1-15). 

FFBFFC0ABD  VTEX1629_ERROR_FRONT_PANEL_SHUNT_ACTIVE 

Sensor identification not allowed on the 
same analog board (channels 1-15). 

FFBFFC0ABE  VTEX1629_ERROR_TEDS_SHUNT_ACTIVE 

Sensor identification not allowed on the 
same analog board (channels 1-15). 

FFBFFC0ABF  VTEX1629_ERROR_INTERNAL_SHUNT_REMOTE_ACTIVE 

Sensor identification not allowed on the 
same analog board (channels 1-15). 

FFBFFC0AC0  VTEX1629_ERROR_SENSOR_LED_ACTIVE 

Operation not allowed when the sensor 
identification LED is on. 

FFBFFC0AC1  VTEX1629_ERROR_TEDS_SHUNT_ENABLED_ON_MULTIPLE_CHANNELS 

TEDS shunt is enabled on multiple 
channels belonging to the same analog 
board (channels 1-15). 

FFBFFC0AC2  VTEX1629_ERROR_TEDS_OPS_NOT_SUPPORTED_WHEN_USING_TEDS_SHUNT 

TEDS operation not supported when the 
TEDS shunt is enabled on the same 
analog board (channels 1-15). 

FFBFFC0AC3  VTEX1629_ERROR_SCANLIST_CONTAINS_BAD_CHANNEL 

Scanlist contains channels that failed 
calibration. 

FFBFFC0AC7  VTEX1629_ERROR_INVALID_LID 

Invalid link ID. 

FFBFFC0AC8  VTEX1629_ERROR_NOT_CONNECTED 

Error: Not connected. 

FFBFFC0AC9  VTEX1629_ERROR_ALREADY_STREAMING 

Error: Already streaming. 

FFBFFC0ACA  VTEX1629_ERROR_APP_QUERY_RESPONSE_MISMATCH 

Application query response mismatch. 

FFBFFC0ACA  VTEX1629_ERROR_APP_QUERY_RESPONSE_MISMATCH 

Application query response mismatch. 

FFBFFC0ACB  VTEX1629_ERROR_DATA_READER_THREAD_ERROR 

Data reader thread error. 

FFBFFC0ACB  VTEX1629_ERROR_DATA_READER_THREAD_ERROR 

Data reader thread error. 

FFBFFC0ACC  VTEX1629_ERROR_INCONSISTENT_CONF_SCANLIST 

Inconsistent confidence scanlist. 

FFBFFC0ACC  VTEX1629_ERROR_INCONSISTENT_CONF_SCANLIST 

Inconsistent confidence scanlist. 

FFBFFC0ACD  VTEX1629_ERROR_INVALID_CHANNEL_LIST_LENGTH 

Invalid channel list length. 

FFBFFC0ACE  VTEX1629_ERROR_INVALID_GAIN 

Invalid gain. 

FFBFFC0ACF  VTEX1629_ERROR_INVALID_CONVERSION_CONFIG 

Invalid conversion configuration. 

FFBFFC0AD1  VTEX1629_ERROR_INVALID_CONF_SCANLIST_LENGTH 

Invalid confidence scanlist length. 

FFBFFC0AD2  VTEX1629_ERROR_INVALID_CONF_SCANLIST_ENTRY 

Invalid confidence scanlist entry. 

FFBFFC0AD3  VTEX1629_ERROR_INVALID_PARAMETER_LIST_LENGTH 

Invalid parameter list length. 

FFBFFC0AD4  VTEX1629_ERROR_INVALID_LEADWIRE_RESISTANCE_VALUE 

Invalid lead wire resistance value. 

FFBFFC0AD5  VTEX1629_ERROR_INVALID_LEADWIRE_DESENSITIZATION_FACTOR 

Invalid lead wire desensitization factor. 

FFBFFC0AD6  VTEX1629_ERROR_INVALID_EXCITE_POS_VOLT 

Invalid positive excitation voltage. 

FFBFFC0AD7  VTEX1629_ERROR_INVALID_EXCITE_NEG_VOLT 

Invalid negative excitation voltage. 

FFBFFC0AD8  VTEX1629_ERROR_INVALID_GAIN_SETTING 

Invalid gain setting. 

FFBFFC0AD9  VTEX1629_ERROR_INVALID_COMPRES_TYPE 

Invalid completion resistor type. 

FFBFFC0ADA  VTEX1629_ERROR_INVALID_SHUNT_SRC 

Invalid shunt source. 

FFBFFC0ADB  VTEX1629_ERROR_CONF_TOO_MANY_ENTRIES 

Too many conf entries. 

FFBFFC0ADC  VTEX1629_ERROR_FPGA_TRIGABORT_ACQ_TO_IDLE_TIMEOUT 

FPGA acquisition to idle timeout. 

FFBFFC0ADD  VTEX1629_ERROR_TEDS_INFO_CRC_FAILURE 

TEDS info CRC failure. 

FFBFFC0ADE  VTEX1629_ERROR_TEDS_ID_CRC_FAILURE 

TEDS ID CRC failure. 

Содержание EX1629



























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EX1629

VeEX FX20 Quick Manual preview
FX20
Бренд: VeEX Страницы: 2
Unico S-1100 Operation Manual preview
S-1100
Бренд: Unico Страницы: 10
Magtrol 6530 User Manual preview
6530
Бренд: Magtrol Страницы: 83
kruss DSA100 Installation And Operation Manual preview
DSA100
Бренд: kruss Страницы: 115
Kawai Digital Piano CA440 Owner'S Manual preview
Digital Piano CA440
Бренд: Kawai Страницы: 48
Hanna Instruments HI96725C Instruction Manual preview
HI96725C
Бренд: Hanna Instruments Страницы: 28
Niigata seiki WDI-3058SP Instruction Manual preview
WDI-3058SP
Бренд: Niigata seiki Страницы: 2
YOKOGAWA Vigilant Plant EXA TB Series User Manual preview
Vigilant Plant EXA TB Series
Бренд: YOKOGAWA Страницы: 140
TCS QWL4.1 Installation Manual preview
QWL4.1
Бренд: TCS Страницы: 45
SPX RADIODETECTION 6100 Series Important Safety Instructions Manual preview
RADIODETECTION 6100 Series
Бренд: SPX Страницы: 6
LI-COR LI-7820 Instruction Manual preview
LI-7820
Бренд: LI-COR Страницы: 92
Ozito ODMM-P11 Online Manual preview
ODMM-P11
Бренд: Ozito Страницы: 4
Promax PROMAX-8+ Manual preview
PROMAX-8+
Бренд: Promax Страницы: 150
Wetekom 87 29 61 Instruction Manual preview
87 29 61
Бренд: Wetekom Страницы: 34
nal von minden Reactif Touch Manual preview
Reactif Touch
Бренд: nal von minden Страницы: 88
Nokeval Kombi-LoRaWAN Manual preview
Kombi-LoRaWAN
Бренд: Nokeval Страницы: 14
Vectronix PLRF10 User Manual preview
PLRF10
Бренд: Vectronix Страницы: 34
Planar IT-14 Operating Manual preview
IT-14
Бренд: Planar Страницы: 27

Бренды по названию

Популярные бренды

Загрузить еще бренды