manualshive.com logo in svg

VTI Instruments EX1629, Руководство пользователя


Поделиться
Скачать
background image

VTI Instruments Corp. 

306 

EX1629 Command Set 

Error Code  Error Message 

Meaning 

FFBFFC0A67  VTEX1629_ERROR_INCORRECT_TEDS_ID_LEN 

Incorrect TEDS device ID length. 

FFBFFC0A68  VTEX1629_ERROR_INCORRECT_TEDS_DATA_LEN 

Incorrect TEDS data length. 

FFBFFC0A69  VTEX1629_ERROR_TEDS_DATA_READBACK_FAILURE 

TEDS device readback failure. 

FFBFFC0A6A  VTEX1629_ERROR_FIFO_OVERFLOW 

Data FIFO overflowed. 

FFBFFC0A6B  VTEX1629_ERROR_EXTERNAL_ADC_MASTER_CLOCK_LOST 

External ADC master clock was lost. 

FFBFFC0A6C  VTEX1629_ERROR_INVALID_CONF_FILTER_WT 

Invalid confidence filter weight. 

FFBFFC0A6D  VTEX1629_ERROR_IIR_NOT_SUPPORTED_FOR_CURR_FS 

IIR filter is not supported for the current 
sample frequency. 

FFBFFC0A6E  VTEX1629_ERROR_CAL_FACTORY_MODE_REQUIRED 

The system must be in factory mode to 
perform this action. 

FFBFFC0A6F  VTEX1629_ERROR_FS_NOT_SUPPORTED_WHEN_CONF_EN 

This sample frequency is not supported 
when confidence sources are enabled. 

FFBFFC0A70  VTEX1629_ERROR_CONF_OPS_NOT_SUPPORTED_FOR_CURR_FS 

Confidence operations are not supported 
at this sample frequency. 

FFBFFC0A71  VTEX1629_ERROR_INVALID_VI_SESSION 

Invalid or null session to the instrument 
passed as parameter to function. 

FFBFFC0A72  VTEX1629_ERROR_RUNTIME_INVALID_PARAMETER 

Invalid or null parameter passed to 
function. 

FFBFFC0A73  VTEX1629_ERROR_ILLEGAL_TRIGGER_SAMPLE_COUNT_SPECIFIED 

Illegal trigger sample count. 

FFBFFC0A74  VTEX1629_ERROR_ILLEGAL_PRETRIGGER_SAMPLE_COUNT_SPECIFIED 

Illegal pretrigger sample count. 

FFBFFC0A75  VTEX1629_ERROR_INVALID_ARM_SOURCE 

Invalid arm source parameter. 

FFBFFC0A76  VTEX1629_ERROR_INVALID_ARM_COUNT 

Invalid arm count parameter. 

FFBFFC0A77  VTEX1629_ERROR_INVALID_EXCITATION_SRC 

Invalid excitation source. Use 
VTEX1629_EXCITE_SRC_LOCAL or 
VTEX1629_EXCITE_SRC_REMOTE. 

FFBFFC0A78  VTEX1629_ERROR_INVALID_SYNCH_SOURCE 

Invalid synch source parameter. 

FFBFFC0A79  VTEX1629_ERROR_INVALID_TRIGGER_DELAY 

Invalid trigger delay parameter. 

FFBFFC0A7A  VTEX1629_ERROR_INVALID_TIMER_PERIOD 

Invalid timer period parameter. 

FFBFFC0A7B  VTEX1629_ERROR_INVALID_MLAN_DATA_LEN 

Invalid MLAN data length parameter. 

FFBFFC0A7C  VTEX1629_ERROR_CALCULATING_SETTLING_TIME 

Error while calculating settling time. 

FFBFFC0A7D  VTEX1629_ERROR_INVALID_ARM_DELAY 

Invalid arm delay parameter. 

FFBFFC0A7E  VTEX1629_ERROR_RESERVED_CODE_1220 

Reserved Error Code 0x1220. 

FFBFFC0A7F  VTEX1629_ERROR_INCONSISTENT_SAMP_CLK_SRC 

Clock source is not consistent across all 
channels and digital backend. 

FFBFFC0A80  VTEX1629_ERROR_HD_INVALID_STATE_TRANSITION 

Improper sequence of hard disk 
commands. 

FFBFFC0A81  VTEX1629_ERROR_HD_MOUNT_FAIL 

Error mounting hard disk. 

FFBFFC0A82  VTEX1629_ERROR_HD_UNMOUNT_FAIL 

Error unmounting hard disk. 

FFBFFC0A83  VTEX1629_ERROR_HD_FILE_EXISTS 

Hard disk file exists. 

FFBFFC0A84  VTEX1629_ERROR_HD_NO_DATA_FILE 

No data file. 

FFBFFC0A85  VTEX1629_ERROR_HD_NO_INDEX_FILE 

No index file. 

FFBFFC0A86  VTEX1629_ERROR_HD_FILE_OPEN_FAIL 

Failure when attempting to open file. 

FFBFFC0A87  VTEX1629_ERROR_HD_NOT_SUPPORTED 

Hard disk not supported. 

FFBFFC0A88  VTEX1629_ERROR_HD_HANG 

Hard disk hang. 

FFBFFC0A89  VTEX1629_ERROR_NET_HANG 

Network hang. 

FFBFFC0A8A  VTEX1629_ERROR_INVALID_EUCONV_EXCITATION_VOLT_SRC 

Illegal mode parameter. 

FFBFFC0A8B  VTEX1629_ERROR_ARG_OUT_OF_RANGE 

Argument out of range. 

FFBFFC0A8C  VTEX1629_ERROR_INVALID_FS_FOR_THIS_SCANLIST 

Maximum sample rate exceeded for 
current scanlist. Maximum is 12.5 kSa/s 
on 16 channels constrained to a bank of 
1-15. 

FFBFFC0A8D  VTEX1629_ERROR_INVALID_SCANLIST_FOR_THIS_FS 

Maximum channels in scanlist exceeded 
for current sample rate. Maximum is 16 
channels constrained to a bank of 1-15. 

FFBFFC0A8E  VTEX1629_ERROR_DIO_NO_INPUT_BANK_CONFIGURED 

Digital error. No input bank configured. 

FFBFFC0A8F  VTEX1629_ERROR_DIO_NO_OUTPUT_BANK_CONFIGURED 

Digital error. No output bank configured. 

FFBFFC0A90  VTEX1629_ERROR_DIO_CONFLICT_OUTPUT_IN_USE 

Digital IO conflict because output is in 
use. 

Содержание EX1629



























































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для EX1629

ICS PM-20 Quick Start Manual preview
PM-20
Бренд: ICS Страницы: 2
CAISSON SL-100 Quick Start Manual preview
SL-100
Бренд: CAISSON Страницы: 5
Valor EXTREME DUTY TPMS Installation preview
EXTREME DUTY TPMS
Бренд: Valor Страницы: 2
Pangea TM50 Setup Procedure preview
TM50
Бренд: Pangea Страницы: 2
OBD VD10 User Manual preview
VD10
Бренд: OBD Страницы: 5
PCB Piezotronics 393B32 Installation And Operating Manual preview
393B32
Бренд: PCB Piezotronics Страницы: 15
JENCO EC3840 Operation Manual preview
EC3840
Бренд: JENCO Страницы: 13
Dräger Alcotest 7000 Instructions For Use Manual preview
Alcotest 7000
Бренд: Dräger Страницы: 538
ADA INSTRUMENTS A00108 Operating Manual preview
A00108
Бренд: ADA INSTRUMENTS Страницы: 27
Trotec BF06WP Operating Manual preview
BF06WP
Бренд: Trotec Страницы: 14
ASCOM TEMS AUTOMATIC - 2 Brochure preview
TEMS AUTOMATIC - 2
Бренд: ASCOM Страницы: 12
Alfa Laval TE67D 1 Series Instruction Manual preview
TE67D 1 Series
Бренд: Alfa Laval Страницы: 18
Clavia Nord C1 Service Manual preview
Nord C1
Бренд: Clavia Страницы: 13
Konica Minolta SKR 4000 User Manual preview
SKR 4000
Бренд: Konica Minolta Страницы: 92
UNI-T UT345C User Manual preview
UT345C
Бренд: UNI-T Страницы: 2
VCA sound SMART RLT Sport User Manual preview
sound SMART RLT Sport
Бренд: VCA Страницы: 36
Fluke 80i-2010s Instructions Manual preview
80i-2010s
Бренд: Fluke Страницы: 8
Casio Privia PX-860BK User Manual preview
Privia PX-860BK
Бренд: Casio Страницы: 67

Бренды по названию

Популярные бренды

Загрузить еще бренды