Voltech AT5600, Руководство пользователя

Страница: 304 / 438

C H A P T E R 1 4 - A T E D I T O R
AT5600 User Manual 98-119 issue 14
Page 304
5. Again, from the Top Level menu bar, select Tester > Run Program
The test program will now begin execution. When it is finished, you will see a
dialogue box containing the results of the test.
From the results, you should be able to see any tests where there may be
problems.
Return to the Program Editor to make the necessary changes and then download
the program again, and run the corrected version.
Continue in this way until you are satisfied that the program is correct, before
archiving it for use in production.
Test times
The first proper test run after compensation, on either via the Editor or Server,
may take longer to execute than the subsequent 2
nd 3 rd 4 th …. runs.
This is because the AT5600 learns the best generator settings to quickly trim to
your requested test conditions.
You should find that subsequent runs can be 200-300% faster than the first run,
and this is expected and normal.
In the event of a later valid failure of a part, t he next run will also be a “learning”
run, and again may be slower, after which the speed will increase again.
Status Codes
The code at the end of each result line should normally be zero; any other code
signifies that an error occurred in the measurement. See 9.1.2