Vicon SURVEYOR 2000 7003-00, Руководство по установке и эксплуатации

Страница: 21 / 64

Figure 9
Close-Up View - In-Ceiling Configuration with Cables
9. Configure the Surveyor2000 communication and address DIP switches as follows:
a) If RS-422 mode will be used:
1. Set switches 1 - 8 on DIP switch 1 (S1) to Surveyor2000’s address as specified in Table 3. All
addresses between 0 and 255 are valid (address 0 is the same as camera number 256).
2. Set switch 1 on DIP switch 2 (S2) to the appropriate video mode (PAL/OFF or NTSC/ON).
XX031-01 Rev 803 Surveyor2000 Camera Dome System Installation
•
17