Vicon SURVEYOR 2000 7003-00, Руководство по установке и эксплуатации

Страница: 39 / 64

WARNING : Connectors TB3 and J3 contain the same control signals. Therefore, wire the control cable to
TB3 OR J3, not both, to avoid communication errors.
WARNING : If Vicoax mode is being used, DO NOT wire TB3 or J3 for control, as this will cause the
camera dome program to lock up upon power-up.
RJ-45 ALARM (J2)
J2-1 ALARM1 Alarm input 1
J2-2 VSSA Ground
J2-3 ALARM2 Alarm input 2
J2-4 VSSA Ground
J2-5 ALARM3 Alarm input 3
J2-6 VSSA Ground
J2-7 ALARM4 Alarm input 4
J2-8
VSSA
Ground
TERMINAL BLOCK
COMM (TB3)
TB3-1 VSSA Ground
TB3-2 RO+ Response out +
TB3-3 CI- Command in -
TB3-4 RO- Response out -
TB3-5
CI+
Command in +
RJ-45 COMM/RELAY (J3)
J3-1 CI+ Command in +
J3-2 RELAY NC Relay, normally closed
J3-3 VSSA Ground
J3-4 RO- Response out -
J3-5 CI- Command in -
J3-6 RELAY C Relay, common
J3-7 RELAY NO Relay, normally open
J3-8
RO+
Response out +
TERMINAL BLOCK
NVT (TB4)
TB4-1 UTP+ Universal Twisted Pair +
TB4-2 UTP- Universal Twisted Pair -
TB4-3 GND Ground
XX031-01 Rev 803 Surveyor2000 Camera Dome System Wiring
•
35