Vicon NOVA V1400, Руководство по программированию

Страница: 32 / 91

20
•
Keypad/Receiver XX009 Rev 1099 NOVA V1400
Set Receiver Profile
The receiver model number, data transmission, home position and status comprise the profile of the receiver
identified at the top of the screen.
Menu Path: Main Menu
→
Keypad/Receiver
→
Receiver Menus
→
Set Rcvr Profile
Receiver Number
The settings on this screen refer to the receiver specified at the top of the screen. The status of the receiver
(ACTIVE or INACTV) will be displayed to the right of the number.
Settings: 0001 to 2048
Keys: Numeric keypad’s + (plus) key or - (minus) key
Shift and numeric keypad’s + (plus) or - (minus) key to increase camera number by 100
Baud Rate
The baud rate is the speed of data transfer between the receiver and the control system. The baud rate
specified at the receiver and on this programming screen must agree. At the receiver, baud rates are set using
the appropriate DIP switch on a printed circuit board. Refer to the appropriate receiver instruction manual to
set the DIP switch or determine the current setting.
Caution: Select the same baud rate for all receivers in the system.
Settings: Disabled
4800 BPS
9600 BPS
Keys: Numeric keypad’s + (plus) key or - (minus) key
Default: 4800 BPS
Receiver Model
Specify the model number of the receiver. Select Undefined if the model number is unknown. The Vicoax
setting is for future use. The V1301R should be selected for both V1300R and V1301R model receivers.
Choose the V1301R-PV model number for the V1300R or V1301R receiver with the variable-speed option
board installed.
Choose the Simplex setting when receiver response is not required by the control system. Receiver alarms
and communication failures will not be reported back to the NOVA V1400 if the Simplex setting is chosen.
This setting is typically used when there is a problem that has not yet been identified and corrected with the
receiver response (perhaps from incorrect wiring), because the NOVA V1400 will not expect responses from
this receiver.