Vicon NOVA V1400, Руководство по программированию

Страница: 16 / 91

4
•
Main Menu XX009 Rev 1099 NOVA V1400
System Programming
System programming is the process of selecting operating parameters which define a particular CCTV
system. The set of operating parameters specified during the programming process is a system configuration.
Using the programming keyboard, selections are made from menu-driven programming screens which are
displayed on the programming monitor. System diagnostics are also performed from programming screens.
In this manual, a Menu Path is used to show the sequence of choices used to display the menu under
discussion. The last paragraph of each section typically includes a Settings listing, which shows all possible
settings for the menu item, a Defaults listing where appropriate and a Keys listing.
Note: Perform partitioning procedures first to make invalid camera/monitor and monitor/keypad combinations
unavailable in other screens. Refer to Set Keypad Partitions on page 18 and Set Camera Partition on
page 57.
Main Menu
Every menu in the NOVA V1400 system is accessed through the Main Menu. Press the number of the menu
item in order to enter that menu; for example, to enter the Alarm Actions screen, press the “3” key on your
programming keyboard. Note that you must use the number keys on the main section of your keyboard - the
number keys on the numeric keypad are typically not functional.
Note: On many of the programming screens, you will see “x / -” at the bottom of the screen. The “x / -”
instructions refer to the plus (+) and minus (-) keys, respectively, on your programming keyboard.
Administration
The Administration Menus are used to specify supervisory parameters such as user privileges, host computer
configuration and timed events. The control system allows three levels of user privilege which limit access to
specific programming screens and functions. Communication settings, such as the baud rate and parity, must
be set in order to transmit data through the host port. Scheduling of timed events and programming of
triggered events are also performed from Administration Menus.
To enter a submenu, enter the appropriate number for that menu item. To return to the previous menu, press
the Escape key.
Administration,
System Diagnostics
and Install Defaults
menus are available
for administrators
only.