Vicon NOVA V1400, Руководство по программированию

Страница: 73 / 91

XX009 Rev 1099 NOVA V1400 Set High Speed Switching Output
•
61
Settings: Y (Yes) or N (No)
Keys: Y or N key
If you selected “0” in the previous screen to disable high speed switching, the following screen will display. All
monitors are now available for normal system usage. Press the Enter key to continue.
If you did not disable high speed switching, continue with system programming by defining the high speed
switching monitors. Press Enter to display the following screen. The following screen is an example; eight
groups will display on the screen if eight monitors were chosen in the screen preceding this one. Designate
the monitor numbers for each of the 8 video switch “groups”. For example, your first group may use monitor 4
and your second group might use monitor 1. Any monitor may be defined as a high speed switching monitor,
but you cannot use a high speed switching monitor for surveillance or as an alarm monitor.
Settings: 001 to 128 (a setting of “000” will disable this feature)
Keys: Numeric keypad’s + (plus) key or - (minus) key
Arrow keys to move to next group
Select Cameras
The Vicon video loss detector will detect the loss of video from any camera in the range of camera numbers
defined in this screen.
Menu Path: Main Menu
→
Video Switch Action
→
Set Hi Spd Sw Output
→
Select Cameras