Vicon NOVA V1400, Руководство по программированию

Страница: 84 / 91

72
•
Set High Speed Switching Output XX009 Rev 1099 NOVA V1400
Test Setup Memory
Menu Path: Main Menu
→
System Diagnostics
→
Test Setup Memory
Setup Memory Test
Menu Path: Main Menu
→
System Diagnostics
→
Test Setup Memory
→
Setup Memory Test
System diagnostics include a test for memory functionality. The test will write unique bit patterns to a
representative sample of memory locations and then read this data to verify the read/write function of control
system memory. The original information in these locations will be read, saved, and restored after the test is
completed. In order to ensure that the original data is restored properly, the test should not be interrupted.
However, some original data may be lost if the setup memory access test fails.
Perform the following procedure to perform a read/write test on the control system memory.
1. If the system configuration has been backed up, press the Enter key to begin testing.
2. The screen will display a “Please Standby” message while the test is performed. After the test has been
completed, a screen will display which provides the “PASSED” or “FAILED” status of the read/write
capabilities of the control system. Note whether the memory test passed or failed and press the Escape
key to return to the System Diagnostics Menu.