Vicon NOVA V1400, Руководство по программированию

Страница: 70 / 91

58
•
Video Switch Action XX009 Rev 1099 NOVA V1400
Cameras For Monitor
The monitor number is identified in the Cameras For Monitor setting. Enabling the cameras partitions them to
the monitor. Disabling the camera removes it from the partitioning table for the selected monitor. After defining
the monitor number, press the Tab key to move to the partitioning table.
Settings: 001 to 128
Keys: Numeric keypad’s + (plus) key or - (minus) key
Tab key to move from Cameras For Monitor setting to partitioning table
Partitioning Cameras to Monitors
The procedure of assigning cameras to monitors is known as partitioning. By default, all cameras are
assigned to all monitors. Video from camera stations may not be displayed on monitors unless the camera
stations are partitioned to those monitors. Monitors are partitioned to keypads as discussed in
Set Keypad
Partitions on page 18. Keypads may only control a camera station if it has been partitioned to a monitor which
was in turn partitioned to that keypad.
The monitor number is identified in the Cameras For Monitor setting. All 2048 cameras are enabled as default,
which partitions all of them to the specified monitor. Disabling the camera removes it from the partitioning
table for the selected monitor. After defining the partition for the selected monitor, use the Tab key to return to
the Cameras For Monitor setting and select another monitor. Use the Tab key to return to the partitioning table
and continue this process until each monitor’s partitioning table has been defined.
Settings: Enabled
Disabled
Keys: Numeric keypad’s + (plus) key or - (minus) key
Shift and numeric keypad’s + (plus) key or - (minus) key to set all cameras past cursor
Default: Enabled
Propagation Delay
In large systems such as the NOVA V1400, propagation delay may result from the numerous card cages and
data cables. Setting the delay allows you to adjust the rate of signal transmission from the video CPU to the
matrix switcher card cages. You may use this feature to correct a switching delay problem, but you must make
the adjustment slowly and carefully until the delay is no longer apparent.
Menu Path: Main Menu
→
Video Switch Action
→
Propagation Delay