FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
29
To set the ARTS Beep mode, use the following procedure:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (ARTS #1: ARTS BEEP”).
3.
Press the [MAIN] or [SUB] key to select the desired ARTS Beep mode (see above).
4.
When you have made your selection, press the PTT key to save the new setting and
exit to normal operation.
CW Identifier Setup
The ARTS feature includes a CW identifier, as discussed previously. Every ten
minutes during ARTS operation, the radio can be instructed to send “DE (your callsign)
K” if this feature is enabled. The callsign field may contain up to 16 characters.
Here’s how to program the CW Identifier:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (ARTS #3: CW ID).
3.
Press the [BAND(BND DN)] key to enable changing of this Menu item. Appear the
“ ” with blinking.
4.
Press the [MAIN] or [SUB] key to set the CW ID function ON.
5.
Rotate the DIAL one click clockwise to begin entry of the letters and numbers in
your callsign.
6.
Press the [MAIN]/[SUB] key or keyboard to set the first letter or number in your
callsign.
Example 1: Press the [MAIN] or [SUB] key to select any of ?? available characters
(including letters, numbers, and special symbols).
Example 2: Press the [2(DW)] key repeatedly to toggle among the seven available
characters: A
"
B
"
C
"
a
"
b
"
c
"
2
7.
When the correct character has been selected, rotate the DIAL one click clockwise
to move on to the next character.
8.
Repeat steps 6 and 7 as many times as necessary to complete your callsign. Note
that the “slant bar” (– • • – • is among the available characters, should you be a
“portable” station.
9.
When you have entered your entire callsign, press the [BAND(BND DN)] key to
define the callsign, then press the PTT key to save the settings and exit to normal
operation.