FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
2
level.
DIAL
DIAL
DIAL
DIAL
The main tuning Dial is used for setting the operating frequency, and also is used for
Menu selections and other adjustments.
Intelligent-Beam (I-Beam)
Intelligent-Beam (I-Beam)
Intelligent-Beam (I-Beam)
Intelligent-Beam (I-Beam)
The Intelligent-Beam (I-Beam) is the unique indicator which indicate the transceiver’s
status. The I-Beam glows Red during transmission, glows Green when a Main band
signal is being received (of sufficient strength to open the noise squelch), glows Blue
when a Sub band signal is being received (of sufficient strength to open the noise
squelch), and glows Orange when a both (Main & Sub) bands signal are being received
(of sufficient strength to open the noise squelch). Also, the I-Beam flash by various color
while emergency operation.
You may customize the I-Beam color by the menu mode.
MIC
MIC
MIC
MIC
The internal microphone is located at the bottom right-hand corner of the display.
SPEAKER
SPEAKER
SPEAKER
SPEAKER
The internal speaker is located directly below the display.
MONI
MONI
MONI
MONI
Pressing this key disables the noise squelching action, allowing you to hear very weak
signals near the background noise level.
PTT
PTT
PTT
PTT
Press this key to transmit, and release it to receive after your transmission is
completed.
MIC/SP
MIC/SP
MIC/SP
MIC/SP
This four-conductor miniature jack provides connection points for microphone audio,
earphone audio, PTT, and ground.