FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
30
DTMF Operation
DTMF Operation
DTMF Operation
DTMF Operation
The VX-7R’s 16-button keypad allows easy DTMF dialing for Autopatch or repeater
control purposes. Besides numerical digits [0] through [9], the keypad includes the [*]
and [#] digits, plus the [A], [B], [C], and [D] tones often used for repeater control.
Manual DTMF Tone Generation
You can generate DTMF tones during transmission manually.
1.
Press the PTT switch to begin transmission.
2.
While transmitting, press the desired numbers on the keypad.
3.
When you have sent all the digits desired, release the PTT key.
DTMF Autodialer
Nine DTMF Autodial memories are provided, allowing you to store telephone numbers
for autopatch use. You can also store short autopatch access code streams so as to avoid
having to send them manually.
Here is the DTMF Autodial storage procedure:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (TSQ/DCS/DTMF #8: DTMF SET).
3.
Press the [BAND(BAND DN)] key to enable adjustment of this Menu Item.
4.
Press the [MAIN] or [SUB] key to select the DTMF Memory register into which you
wish to store this DTMF string.
5.
Rotate the DIAL knob one click to begin DTMF Memory entry into the selected
register.
6.
Key in the DTMF digits you wish to store into this register.
Press the [MAIN] key to store the “Pause,” then press again the [MAIN] key to
delete the previously storing data after the cursor.
7.
Press the PTT switch to save the setting. To store other numbers, repeat this
process, using a different DTMF memory register.
To send the telephone number:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (TSQ/DCS/DTMF #7: DTMF DIALER).
3.
Press the [MAIN] or [SUB] key to set the DTMF Autodialer function to the “ON”
position.
4.
Press the PTT switch to exit to normal operation and activates the DTMF
Autodialer function (“Telephone” icon will appear).
