FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
45
channel.
3.
Now set the VX-7R for operation on another memory channel, or on a VFO
frequency.
4.
Press the [MON/F] key, then press the [2(DW)] key. The display will remain on the
VFO or memory channel selected, but every four seconds the VX-7R will check the
Priority Channel for activity.
Automatic Lamp Illumination on Scan Stop
Automatic Lamp Illumination on Scan Stop
Automatic Lamp Illumination on Scan Stop
Automatic Lamp Illumination on Scan Stop
The VX-7R will automatically illuminate the LCD Lamp whenever the scanner stops
on a signal; this allows you to see the frequency of the incoming signal better at night.
Note that this will, of course, increase the battery consumption, so be sure to switch it
off during the day (the default condition for this feature is “ON”).
The procedure for disabling the Scan Lamp is:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (Scan Modes #4: SCAN LAMP).
3.
Press the [MAIN] or [SUB] key to set this Menu Item to OFF.
4.
When you have made your selection, press the PTT to save the new setting and exit
to normal operation.
Band Edge Beeper
Band Edge Beeper
Band Edge Beeper
Band Edge Beeper
The VX-7R will automatically “beep” when a band edge is encountered during
scanning (either in standard VFO scanning or during PMS operation). You may disable
this feature, if it is annoying, without disabling the keypad beeper (the default condition
for this feature is “ON”.
The procedure for disabling the Band-Edge Beeper is:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (Scan Modes #2: EDGE BEEP).
3.
Press the [MAIN] or [SUB] key to set this Menu Item to OFF.
4.
When you have made your selection, press the PTT to save the new setting and exit
to normal operation.
Smart Search Operation
Smart Search Operation
Smart Search Operation
Smart Search Operation
The Smart Search feature allows you to load frequencies automatically according to