FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
19
DIAL + PTT:
Both the DIAL and PTT switch are locked out
ALL:
All of the above are locked out
To lock out some or all of the keys:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (Basic Setup #10: LOCK MODE).
3.
Press the [MAIN] or [SUB] key to choose between one of the locking schemes as
outlined above.
4.
When you have made your selection, press the PTT switch to save the new setting
and resume normal operation.
5.
To activate the locking feature, press and hold in the [%(TX PO LK)] key for 2
seconds. The “Key Lock” icon will appear on the LCD. To cancel locking, again press
and hold the [%(TX PO LK)] key for 2 seconds.
R
R
R
R....F
F
F
F.... Say
Say
Say
Say
: Even when “ALL” keys have been locked out, one key actually is not locked
out: the [%(TX PO LK)] key remains available so you can Unlock your keypad when you
want to!
Keypad/LCD Illumination
Keypad/LCD Illumination
Keypad/LCD Illumination
Keypad/LCD Illumination
Your VX-7R includes a reddish illumination lamp which aids in nighttime operation.
The red illumination yields clear viewing of the display in a dark environment, with
minimal degradation of your night vision. Three options for activating the lamp are
provided:
KEY Mode: Illuminate the Keypad/LCD for five seconds when any key pressed.
CONTINUE Mode: Illuminate the Keypad/LCD continuously.
OFF Mode: Disables the Keypad/LCD lamp.
Here is the procedure for setting up the Lamp mode:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (Display Setup #5: LAMP MODE).
3.
Press the [MAIN] or [SUB] key to select one of the three modes described above.
4.
When you have made your choice, press the PTT key to save the new setting and
return to normal operation.
Disabling the Keypad Beeper
Disabling the Keypad Beeper
Disabling the Keypad Beeper
Disabling the Keypad Beeper
If the keypad’s Beeper creates an inconvenience (particularly when operating in a
quiet room), it may easily be disabled.
1.
Press [MON/F] then, press the [0(SET)] key to enter the Set mode.
