FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
17
example.
R
R
R
R....F
F
F
F.... Say
Say
Say
Say
: If the operating mode is not correct, you may need to adjust the setting of
Menu Item (Basic Setup #4: RX MODE). See page ?? for details.
The VX-7R is stored the frequency of the Short-wave Broadcast station into the memory
channel “???” through “???.”
AM Aircraft Reception
AM Aircraft Reception
AM Aircraft Reception
AM Aircraft Reception
Reception of AM signals in the aeronautical band (108-137 MHz) is similar to that
described in the previous section.
1.
Be sure that the VX-7R is set to the VFO mode.
2.
Press the [BAND(BND DN)] key (or Press [MON/F]
"
[BAND(BND DN)])
repetitively until you see a frequency in the aeronautical band.
3.
Rotate the DIAL to tune across the aeronautical band.
4.
You may also use the keypad to enter frequencies directly. Remember that
frequencies quoted by aircraft operators may be abbreviated, and that the “5” at the
end of a frequency may be dropped. Since aeronautical channels are assigned in
25-kHz steps, therefore, a frequency announced as “thirty-two, forty-two”
corresponds to an operating frequency of 132.425 MHz.
FM Broadcast/TV Audio Reception
FM Broadcast/TV Audio Reception
FM Broadcast/TV Audio Reception
FM Broadcast/TV Audio Reception
The VX-7R also includes provision for reception in the FM broadcast band, utilizing a
wide-bandwidth filter which provides excellent fidelity.
To Activate FM Broadcast Reception
1.
Be sure that the VX-7R is set to the VFO mode.
2.
Press the [BAND(BND DN)] key (or Press [MON/F]
"
[BAND(BND DN)])
repetitively until a frequency in the FM broadcast band appears on the display. The
total frequency range included in the “FM” band is 59-108 MHz.
3.
Rotate the DIAL to select the desired station. The default synthesizer steps for the
W-FM mode are 100 kHz/step.
To Activate VHF or UHF TV Audio Reception
1.
Be sure that the VX-7R is set to the VFO mode.
2.
Press the [BAND(SET)AR] key repetitively until a frequency in the VHF or UHF
TV bands appears on the LCD.