FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
8
•
If using an external antenna for transmission, ensure that the SWR presented to
the transceiver is 1.5:1 or lower.
•
Take care not lose the antenna cap when removing it from the Base Antenna.
How to Quick Draw
How to Quick Draw
How to Quick Draw
How to Quick Draw Belt Clip
Belt Clip
Belt Clip
Belt Clip
1.
Connect the hanger to the rear of the VX-
VX-
VX-
VX-7R
7R
7R
7R, with the notch pointing directly up,
using the supplied screw (Figure XX).
Use
Use
Use
Use only
only
only
only the screw included with the clip to
the screw included with the clip to
the screw included with the clip to
the screw included with the clip to
mount the clip to the back of the
mount the clip to the back of the
mount the clip to the back of the
mount the clip to the back of the VX-7R!
VX-7R!
VX-7R!
VX-7R!
2.
Clip the Quick-Draw Belt Clip onto your belt (Figure xx).
3.
To install the VX-
VX-
VX-
VX-7R
7R
7R
7R into the Quick-Draw Belt Clip, align the hanger with the
Quick-Draw Belt Clip, and slide the MAGNUM into its slot until a click is heard.
4.
To remove the VX-
VX-
VX-
VX-7R
7R
7R
7R from the Quick-Draw Belt Clip, rotate the VX-
VX-
VX-
VX-7R
7R
7R
7R 180 degrees,
then slide the VX-
VX-
VX-
VX-7R
7R
7R
7R out from the Quick-Draw Belt Clip (Figure xx).
Installation of FNB-8
Installation of FNB-8
Installation of FNB-8
Installation of FNB-80000LI Battery Pack
LI Battery Pack
LI Battery Pack
LI Battery Pack
The FNB-80LI is a high-performance Lithium-Ion battery providing high capacity in
a very compact package. Under normal use, the FNB-80LI may be used for
approximately 300 charge cycles, after which operating time may be expected to
decrease. If you have an old battery pack which is displaying capacity which has become
diminished, you should replace the pack with a new one.
1.
Push the bottom latch slightly to the “Open” position.
2.
Install the FNB-80LI as shown in the illustration.
3.
Re-lock the bottom plate by carefully pressing the hinged latch cover back into its
normal operating position.
If the battery has never been used, or its charge is depleted, it may be charged by
connecting the NC-72B/C Battery Charger, as shown in the illustration, to the EXT DC
jack. If only 12 ~ 16 Volt DC power is available, the optional E-DC-5B or E-DC-6 DC
Adapter (with its cigarette lighter plug) may also be used for charging the battery, as
shown in the illustration.
The display will indicate “NOW CHARGING” while the battery is being charged.
When charging is finished, the display will change to indicate “COMPLETE.”
Installation of FBA-23 (Option) Alkaline Battery Case
The optional FBA-23 Battery Case allows receive monitoring using two “AA” size
Alkaline batteries. Alkaline batteries can also be used for transmission in an emergency,
but power output will only be 300 mW, and battery life will be shortened dramatically.