FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
43
2.
Rotate the DIAL to select the Memory Channel to be skipped during scanning.
3.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
4.
Rotate the DIAL to select Menu Item (Basic Setup #13: SKIP MODE).
5.
Press the [MAIN] or [SUB] key so as to select “SKIP.” It is to be ignored during
scanning. The “ONLY” selection is “Preferential Memory Scan,” described next
column.
6.
When you have made your selection, press the PTT key to save the settings and exit
to normal operation.
A small “
!
” icon will appear when recall the “skipped” memory channel.
To re-institute the channel into the scanning loop, select “OFF” in step 5 above (the
“Skipped” channel will, of course, still be accessible via manual channel selection
methods using the DIAL in the MR mode).
Preferential Memory Scan
The VX-7R also allows you to set up a “Preferential Scan List” of channels which you
can “flag” within the memory system. These channels are designated by a “!” icon when
you have selected them, one by one, for the Preferential Scan List. When you initiate
memory scanning on a channel with the “!” icon appended, only those channels bearing
the “!” icon will be scanned. If you initiate scanning on a channel which does not have
the “!” icon appended, you will scan all channels including those with the “!” icon
appended.
1) Here is the procedure for setting up and using the Preferential Scan List:
1.
Press the [V/M(WRITE MT)] key momentarily to enter the Memory Recall mode, if
you are not using memories already.
2.
Rotate the DIAL to select the channel which you wish to add to the Preferential
Scan List.
3.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
4.
Rotate the DIAL to select Menu Item (Basic Setup #13: SKIP MODE).
5.
Press the [MAIN] or [SUB] key so as to select “ONLY.”
6.
When you have made your selection, press the PTT key to save the settings and exit
to normal operation.
2) To initiate Preferential Memory Scan:
1.
Press the [V/M(WRITE MT)] key momentarily to enter the Memory Recall mode, if
you are not using memories already.
