FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
47
Search memories.
7.
To return to normal operation, press the [MON/F] key, then press the [5(S.SCH)]
key.
R
R
R
R....F
F
F
F.... Say
Say
Say
Say
: Smart Search is a great tool when visiting a city for the first time. You don’t
need to spend hours looking up repeater frequencies from a reference guidebook… just
ask your VX-7R where the action is!
Spectrum analyzer Operation
Spectrum analyzer Operation
Spectrum analyzer Operation
Spectrum analyzer Operation
The Spectrum Analyzer allows viewing operating activity on channels above or below
the current operating channel in the VFO mode.
The display indicates the relative signal strength on channels immediately adjacent
to the current operating frequency.
Two basic operating modes for Spectrum Analyzer are available:
SINGLE Sweep: In this mode, the transceiver sweeps the current band once.
CONTINUE:
In this mode, the transceiver sweeps the current band repeatedly
until the Spectrum Analyzer is turned off.
Setting the Spectrum Analyzer mode
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (Scan Modes 6: SPEC-ANAL1).
3.
Rotate the DIAL to select the desired Spectrum Analyzer mode (see above).
4.
When you have made your selection, press the PTT to save the new setting and exit
to normal operation.
To activate the Spectrum Analyzer:
1.
Set the radio to the VFO mode in the desired band.
2.
Press the [MON/F] key, then press the [6(SP-ANA)] key to activate the Spectrum
Analyzer.
3.
When the Spectrum Analyzer is activated, press the [MAIN] or [SUB] key to change
the visible bandwidth. Available selections are ±5, ±8, ±14, ±29, and ±60 channels
(default: ±5 channel). The visible bandwidth, however, depends on the selected
channel step size, so match the default channel steps with the amateur band you
are using.
4.
To turn the Spectrum Analyzer off and operate on the centered (and displayed)
