FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
34
radio’s TOT feature for a maximum transmission time of 1 minute. This will
significantly improve battery life, too!
Busy Channel Lock-Out (BCLO)
Busy Channel Lock-Out (BCLO)
Busy Channel Lock-Out (BCLO)
Busy Channel Lock-Out (BCLO)
The BCLO feature prevents the radio’s transmitter from being activated if a signal
strong enough to break through the “noise” squelch is present. On a frequency where
stations using different CTCSS or DCS codes may be active, BCLO prevents you from
disrupting their communications accidentally (because your radio may be muted by its
own Tone Decoder). The default setting for the BCLO is OFF, and here is how to change
that setting:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (Misc Setup #1: BCLO).
3.
Press the [MAIN] or [SUB] key to set this Menu Item to “ON” (this activating the
BCLO feature).
4.
Press the PTT key to save the new setting and resume normal operation.
MIC Monitor
MIC Monitor
MIC Monitor
MIC Monitor
The MIC Monitor feature enable to monitor the sound around the transceiver by the
optional VC-27 Earpiece/Microphone.
1.
Connect the VC-27 Earpiece/Microphone to the MIC/EAR jack.
2.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
3.
Rotate the DIAL to select Menu Item (Misc Setup #19: MIC MONITOR).
4.
Press the [MAIN] or [SUB] key to set this Menu Item to “ON” (this activating the
MIC Monitor feature).
5.
Press the PTT key to save the new setting, and the VX-7R’s internal microphone
pick up the sound around the transceiver, then output its to the VC-27
Earpiece/Microphone.
R.F.Say
R.F.Say
R.F.Say
R.F.Say
: When this feature is activated without the VC-27 Earpiece/Microphone, the
VX-7R engage the howling.
Changing the TX Deviation Level
Changing the TX Deviation Level
Changing the TX Deviation Level
Changing the TX Deviation Level
In many areas of the world, channel congestion has required that operating channels
be closely spaced. In such operating environments, it often is required that operators
use reduced deviation levels, so as to reduce the potential for interference to users on
adjacent channels. The VX-7R includes a simple method of accomplishing this:
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.