FCC ID: K66VX-7R
Operating Manual
Vertex Standard Co., Ltd.
20
2.
Rotate the DIAL to select Menu Item (Basic Setup #9: KEY BEEP).
3.
Press the [MAIN] or [SUB] key to change the setting from ON to OFF.
4.
When you have made your selection, press the PTT key to save the new setting and
exit to normal operation.
5.
If you wish to re-enable the Beeper, just repeat the above procedure, pressing the
[MAIN] or [SUB] key to select ON in step “3” above.
Advanced Operation
Advanced Operation
Advanced Operation
Advanced Operation
Now that you’re mastered the basics of VX-7R operation, let’s learn more about some
of the really neat features.
Setting the Frequency Display Image Size
Setting the Frequency Display Image Size
Setting the Frequency Display Image Size
Setting the Frequency Display Image Size
VFO Mode
When operating in the VFO mode, press the [MON/F] key, then press the [MAIN] or
[SUB] key causes the LCD to “toggle” between display of
large
large
large
large
characters and the
small
small
small
small
characters. However, this feature does not activate while Dual Receive operation.
Memory Mode
When operating in the Memory mode (see page ??), press the [MON/F] key, then press
the [MAIN] or [SUB] key causes the LCD to “toggle” between display of the (large
characters) current memory’s frequency and the (small characters) current memory’s
frequency with alpha numeric Tag. However, this feature does not activate while Dual
Receive operation.
Changing the Channel Steps
Changing the Channel Steps
Changing the Channel Steps
Changing the Channel Steps
The VX-7R’s synthesizer provides the option of utilizing channels steps of
5/9/10/12.5/15/20/25/50/100 kHz per step, any number of which may be important to
your operating requirements. The VX-7R is set up at the factory with different default
steps on each operating band which probably are satisfactory for most operation.
However, if you need to change the channel step increments, the procedure to do so is
very easy.
1.
Press the [MON/F] key, then press the [0(SET)] key to enter the Set mode.
2.
Rotate the DIAL to select Menu Item (Basic Setup #3: VFO STEP).
3.
Press the [MAIN] or [SUB] key to select the new channel step size.
4.
Press the PTT key to save the new setting and exit to normal operation.