1
IMP
ORT
ANT
:
Go to www
.extr
on.com f
or the
complete user guide
, installation
instructions,
and specifications.
XTP FT HD 4K and XTP FR HD 4K • Setup Guide
CLASS 1 LASER PRODUCT,
see the
XTP FT HD 4K and XTP FR HD 4K User Guide
at
www.extron.com
.
The XTP FT HD 4K is an XTP
®
transmitter and the XTP FR HD 4K is an XTP receiver for video, audio, bidirectional control, and
Ethernet transmission over a fiber optic cable. This guide provides instructions for an experienced installer to install and connect
the XTP FT HD 4K and XTP FR HD 4K.
Transmitter Connectors
Receiver Connectors
A
DC power connector
B
HDMI input connector
C
HDMI Loop-thru connector
and HDMI audio switch
D
Analog audio input
connector
E
RS-232 and IR Over XTP
connector
F
XTP output connector
G
LAN connector
H
DC power connector
I
XTP input connector
J
LAN connector
K
RS-232 and IR Over XTP
connector
L
HDMI output connector and
HDMI audio switch
M
Analog audio output connector
N
S/PDIF audio output connector
O
Relay connectors
Figure 1.
Rear Panel Connectors
Installation
Step 1
—
Mount the Devices
Turn off or disconnect all equipment power sources and mount the transmitter and receiver on a tabletop or in a rack.
Step 2
—
Connect Inputs
a.
Connect a digital video source to the female HDMI connector (see figure 1,
B
) on the transmitter. It accepts HDMI, DVI (with
an appropriate adapter), or dual mode DisplayPort video signals.
NOTES:
•
Use an Extron LockIt
®
lacing bracket to secure HDMI cables to the rear panel connectors.
•
Video input from a DisplayPort source must be a dual mode DisplayPort source.
b.
Connect a digital video display to the HDMI Loop-thru connector (
C
) on the transmitter to locally display the input source. A
display that is not HDCP-compliant displays a green screen when HDCP-encrypted content is sent to it.
c.
Connect balanced or unbalanced stereo audio to the
3.5 mm, 5-pole captive screw connector (
D
).
Step 3
—
Connect Throughput Devices
a.
Connect a fiber optic cable between the XTP connectors on the transmitter (
F
) and receiver (
I
).
WARNING:
Potential risk of severe injury.
The XTP FT HD 4K and XTP FR HD 4K output continuous invisible light
(class 1 rated), which may be harmful to the eyes; use with caution.
AVERTISSEMENT :
Risque potentiel de blessure grave ou de mort.
Le XTP FT HD 4K et XTP FR HD 4K émet une
lumière invisible en continu (conforme à la classe 1) qui peut être dangereux pour les yeux, àutiliser avec précaution.
•
Do not look into the fiber optic cable connectors or into the fiber optic cables themselves.
•
Ne regardez pas dans les connecteurs de câble fibre optique sur le ou dans les câbles fibre optique euxmêmes.
•
Plug the attached dust caps into the optical transceivers when the fiber optic cable is unplugged.
•
Branchez la protection contre la poussière dans l’ensemble émetteur/récepteur lorsque le câble fibre optique est
débranché.
Signal LED indicator
— Lights green on the transmitter when it is transmitting a video signal or test pattern. Lights green on
the receiver when it receives an active XTP input signal from a transmitter or matrix switcher.
Link LED indicator
— Lights yellow when a valid link between an XTP input and output is established.
Do not tin the wires!
Unbalanced Stereo Input
Balanced Stereo Input
Tip
Ring
Tip
Ring
Sleeves
Tip
Sleeve
Sleeve
Tip
LR
LR
POWER
12V
1.0 A MAX
XTP FR HD 4K
HDMI
S/PDIF
AUDIO
AUDIO
SIG
LINK
LAN
RS-232 IR
L
Tx Rx
Tx Rx
RESET
G
R
1
2
ON
OFF
XTP IN
OVER XTP
OUTPUTS
RELAYS
XTP FR HD 4K
POWER
12V
1.0 A MAX
XTP FT HD 4K
HDMI
AUDIO
AUDIO
SIG
LINK
LAN
RS-232
IR
L
Tx Rx
Tx Rx
RESET
G
R
ON
OFF
LOOP THRU
XTP OUT
OVER XTP
INPUTS
XTP FT HD 4K
A
B
C
D
E
F
G
H
I
J K
L
M N O
